Hi all,
I have 3 x Cisco SPA 112 ATAs all registered back to a Unify Openscape Business PBX.
The SPA 112s are not on the local site to the PBX they are on a remote site which has a VPN connection to the main site where the PBX is located.
Now the issue I face is that the VPN sometimes has a tendency to drop so the SPA 112s registration fails as it cannot see the PBX.
Once the VPN reconnects the SPA 112s don't re-register until the are rebooted, is there anyway of stopping this so they automatically re-register?
