cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.

1039
Views
5
Helpful
2
Replies
keith Kress
Beginner

Help with configuring on 24/7 7970 backlighting on UC540

Desperately looking for a configuration example to configure back lit 7970 phones on my UC540 to stay backlit 24/7. ive tried entering commands for active days and length to no avail. if someone could be as kind to provide me with an example i would appreciate it. ive tried this several times with no success.

1 ACCEPTED SOLUTION

Accepted Solutions
Brandon Buffin
Advisor

You should be able to use the "service phone" commands under "telephony-service" such as:

 

Router(config)# telephony-service
Router(config-telephony)# service phone backlightOnTime 00:00
Router(config-telephony)# service phone backlightOnDuration 24:00
Router(config-telephony)# create cnf-files
Router(config-telephony)# reset all

 

Be aware that the parameters are case-sensitive.

 

Brandon

View solution in original post

2 REPLIES 2
Brandon Buffin
Advisor

You should be able to use the "service phone" commands under "telephony-service" such as:

 

Router(config)# telephony-service
Router(config-telephony)# service phone backlightOnTime 00:00
Router(config-telephony)# service phone backlightOnDuration 24:00
Router(config-telephony)# create cnf-files
Router(config-telephony)# reset all

 

Be aware that the parameters are case-sensitive.

 

Brandon

View solution in original post

wow amazing that worked! thank you so so very much! rated! you have a great new year!