Hi,
My current AP infrastructure consists of Cisco 1242AGs. I've purchased a Small business pro 541n and need to be able to form a wireless bridge into my current network from it.
In a lab I've configured 2 Cisco 1242 APs, one as a root bridge and one as a workgroup bridge and can successfully form a bridge between these 2 APs.
Now I add in the AP541n, configured with the same SSID, Channel, WPA-PSK and get nothing.
I've ran debugs on the root AP and can't see the AP541n even attempting to connect.
Any ideas?
thanks,
Alun.
