I have a RV110W setup as a wireless router right now. There is only 1 wireless network, the private office network. I would like to setup a guest network on its own VLan for internet only access. How do I go about this?
Here is my current setup.
Vlan 1 192.168.1.0 / 24
Firewall with internet: 192.168.1.1
DHCP Server: 192.168.1.5
I have a managed switch that has defined all the ports to VLan 1.
The RV110W is setup like the following.
I have port 1 going to the router (not the Wan port, port #1).
I have given the port a static Ip address and disabled DHCP on the device.
I have a wireless network defined for VLan 1 and all the ports have untagged traffic going to VLan 1.
What do I have to do to set this up correctly?
