Mounting Brackets for WLC526

[Benjamin Waldon]

I ordered a WLC526 for a customer. Howevever, it didn't come with brackets to mount it into a standard 19" rack.

I called our distributer support. They said that it's intended to be a desktop unit. However, it has screw holes on the side of it.

Does anyone have a part number for brackets to mount the WLC526 into the rack?

Thanks,

Ben

[Michael Adler · Accepted solution]

The 526 controller doesnt have its own brackets, but the controller housing is the same as the UC500 housing, so you can order the brackets for the UC500.

ASA5505-RACK-MNT     for Rack

ASA5505 -WALL- MNT   for Wall

Mike

[Benjamin Waldon]

Thanks alot.

Those part numbers are actually for the asa, but i hear they will work on the WLC526. The actual part number for the UC500 rack mounts is ACS-UC500RM-19=.

I found that the "UC500" part number quite a bit less expensive than the ASA part number.

Thanks,

Ben