We got 2 buildings in our office, I label it as Location A and B.
The following image is our company network diagram.
We would like to make both AP to use same SSID, what is the best practise to configure it? Same SSID, same password and even same channel (channel 11)
We set the AP in building A, as AP, and Building B as repeated, we found it Building B signal is not stable enough, sometimes the Wireless LED is off by itself. We not even able to access via web browser. It's like hang.
Hi Ken, thank you for using our forum, my name is Luis I am part of the Small business Support community. I am glad to assist you with your configuration, bellow you will see an article with some advises in order to set your roaming, also some tips in order to improve your wireless signal.
Welcome back for issue number 2 of the small business support community newsletter. Over the coming months we're going to share exciting news on the hardware and support community side. For now, we'll highlight our new favorite docs, pertinent...
Change in ASD Automatic Software Download Feature
Dec 13th, 2019
Cisco RV160, 260, 340, and 345 Series Routers
Due to an API change in Cisco’s software download platform the Automatic Download Feature (ASD) on RV series routers will be temporarily ...
SFP Module Support List for RV160x and RV260x Devices
Small form-factor pluggable (SFP) ports are included on the RV160 and 260 routers to allow the use of optical SFP transceiver modules. SFP’s convert the optical signals to electrical signals. SFP’s al...
Cisco is excited to offer its San Jose customers a unique opportunity to join us at Cisco headquarters for a design thinking workshop. This exclusive gathering, of no more than 20 people, is designed for an immersive interactive one-day session bet...