cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Announcement“Cisco Design Thinking Workshop”. Cisco Small Business is excited to invite its Silicon Valley customers to an exclusive interactive one-day session between customers and product Managers.  If you are interested in this exclusive workshop, please fill out the Registration Form. For more information, please check out our FAQ


Get the latest new and information the November issue of the Cisco Small Business Monthly Newsletter

7082
Views
0
Helpful
7
Replies
Beginner

WAP 321 new Firmware

I see new firmware is available fo rthe WAP 321.

I tried to read the release notes from the link in the rupper right hand side of the scren bt get a 'Forbidden file' message.    I am logged into Cisco.com .

1 ACCEPTED SOLUTION

Accepted Solutions
Rising star

WAP 321 new Firmware

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.

The release notes for the WAP321 and the WAP121 are the same. Please try this link:

http://www.cisco.com/en/US/docs/wireless/access_point/csbap/wap121/release/notes/ReleaseNotes_for_the_WAP121_321.pdf

I was able to get to this. I will have the other link investigated.

Thanks

Eric Moyers

Cisco Network Advanced Support Engineer

SBSC Wireless and Surveillance SME

CCNA, CCNA-Wireless

1-866-606-1866

View solution in original post

7 REPLIES 7
Rising star

WAP 321 new Firmware

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.

The release notes for the WAP321 and the WAP121 are the same. Please try this link:

http://www.cisco.com/en/US/docs/wireless/access_point/csbap/wap121/release/notes/ReleaseNotes_for_the_WAP121_321.pdf

I was able to get to this. I will have the other link investigated.

Thanks

Eric Moyers

Cisco Network Advanced Support Engineer

SBSC Wireless and Surveillance SME

CCNA, CCNA-Wireless

1-866-606-1866

View solution in original post

Beginner

WAP 321 new Firmware

Thanks Eric,  That link works just fine.

Regards

Clive

Beginner

WAP 321 new Firmware

Eric,

I note this is just a MIB files update for WAP321 - any status on when the new firward will actually be available?

Cheers,

Dale Bentley

Rising star

WAP 321 new Firmware

Hi Dale,

Please go here to download the f/w:

http://www.cisco.com/cisco/software/release.html?mdfid=284152656&flowid=32563&softwareid=282463166&release=1.0.1.10&relind=AVAILABLE&rellifecycle=&reltype=latest

Regards,
Cindy Toy
Cisco Small Business Community Manager
for Cisco Small Business Products
www.cisco.com/go/smallbizsupport
twitter: CiscoSBsupport

Regards, Cindy If my response answered your question, please mark the response as answered. Thank you!
Highlighted
Beginner

WAP 321 new Firmware

Thanks Cindy,

Somehow I ended up in the MIB download section however never realized my mistake.

I have successfully downloaded and applied the latest firmware to one WAP now for testing.

Cheers,

Dale.

Beginner

WAP 321 new Firmware

When implementing this new firmware do I have to reset the AP back to Factory Defaults first?

Rising star

WAP 321 new Firmware

Hello,

The reason that Cisco recommends this on occasion, is when there is an added feature or layout change, the old configuration will not always match up with the new GUI, which in some circumstances can cause issues.

It is not specifically stated that with this firmware that you have too. However as a general rule I always have customers that I am working with do a factory reset. Doing so does not hurt anything.

Hope this helps.

Eric Moyers