cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements
Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
246
Views
0
Helpful
0
Replies
Highlighted

WAP 581 suddently resets to factory

Our network is mainly cisco devices with the exception of the Firewall

 

The structure basically a MDF, IDF2 and IDF3. IDF2 and IDF3 connect to MDF by fiber independently.

 

IDF2 has two switch (1x SG200-26P and 1x SF300-48P), three WAP581 connect to this room.

IDF3 hast one switch (1x SG200-26P), three WAP581 connect to this room

 

We are experiencing some unexplained behavior with our WAP581s, they are brand new and all have been Cluster, each with respectively priority and one IP to manage the cluster. Some have been resetting back to factory default by themselves.

 

We have some suspicious that is related to some sort of PoE issues but the behavior is not happening with all. Most commonly its only happening to the APs connected to SG200-26P. Thus we think it might be the SG200 switch causing it however we don't know why or how?

 

Have anyone experience a behavior like this?