04-24-2013 12:50 AM
I'd like to filter traffic on certain ssid on wap121. I want that clients will be allowed only to access certain services, such as http, https, pop3, smtp, imap.
I have tried with setting up access list/ class map/ policy map configuration in Client QoS menu, but it seems I'm doing something wrong here.
Any help will be appreciated.
Solved! Go to Solution.
04-29-2013 08:25 AM
Hi Anze, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. Bellow you can find a link with specific steps in order to help you with your filtering configuration also the port that you want to allow also you need to create a rule denying the rest.
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=2211
http: 80
https: 443
Pop3: 110
SMTP: 25
imap: 143
I hope you find this answer useful
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.
04-29-2013 08:25 AM
Hi Anze, thank you for using our forum, my name is Johnnatan I am part of the Small business Support community. Bellow you can find a link with specific steps in order to help you with your filtering configuration also the port that you want to allow also you need to create a rule denying the rest.
http://www6.nohold.net/CiscoSB/Loginr.aspx?login=1&pid=2&app=search&vw=1&articleid=2211
http: 80
https: 443
Pop3: 110
SMTP: 25
imap: 143
I hope you find this answer useful
“Please rate useful posts so other users can benefit from it”
Greetings,
Johnnatan Rodriguez Miranda.
Cisco Network Support Engineer.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: