cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3623
Views
11
Helpful
6
Replies

WAP321 - Associated Clients OID

kfreegard
Level 1
Level 1

Hi All,

I just got a WAP321 to replace a very frustrating WAP4410, does anyone know the SNMP OID to obtain associated wireless clients for each of the SSIDs ?  I'd be happy with any OID for client numbers so total clients associated will be fine.

Many Thanks

Kev F

6 Replies 6

kfreegard
Level 1
Level 1

Hi All - I've been trawling the forums and other sites and still cannot fiend either an OID for associated clients or CPU - I've done loads of snmpwalks and compared them and just can't spot anything.

If anyone can help I'd really appreciate it.

Many Thanks

Kev F

Hi Kevin, may be these can be helpful for you

For wireless device names

1.3.6.1.4.1.9.9.273.1.2.1.1.13

Ip addressess

1.3.6.1.4.1.9.9.273.1.2.1.1.16

SSID

1.3.6.1.4.1.9.9.272.1.1.1.6.1.2

Signal strength

1.3.6.1.4.1.9.9.273.1.3.1.1.3

-Tom
Please rate helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

Hey Tom

Sadly none of those work for me (No Such Object available on this agent at this OID) but thanks for taking the time and looking at my post.

Kev F

Kevin, to verify you have the latest mib file?

http://www.cisco.com/cisco/software/release.html?mdfid=284152656&catid=278875243&softwareid=283415686&release=1.0.0.3&relind=AVAILABLE&rellifecycle=&reltype=latest

-Tom
Please rate helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

I am still looking through the mib from the Cisco site, here is one of possible interest.

1.2.840.10036.2.1.1.1

dot11MACAddress OBJECT-TYPE
SYNTAX MacAddress
MAX-ACCESS read-only
STATUS current
DESCRIPTION
"Unique MAC Address assigned to the STA."
::= { dot11OperationEntry 1 }

-Tom
Please rate helpful posts

-Tom Please mark answered for helpful posts http://blogs.cisco.com/smallbusiness/

Hey Tom,

I'm getting somewhere now, updated the mibs on my server with the ones above and bingo I can see a list of associated clients associated to wlan0 . I have enough now to pull some bash together to create some graphs on client numbers.

I spent a few hours tinkering last night and CPU is still elusive as the LM SENSORS mib doesnt seem to do a great deal but thanks for the pointer - really useful.

Rgds

Kev F

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: