cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Cisco Small Business Community

Have a question? Click on a topic board below to get started in the community.
Get the latest news in this issue of the Cisco Small Business Monthly Newsletter

193
Views
0
Helpful
1
Replies
Highlighted

WAP371 stops transmitting on Radio 2

Hi,

 

After noticing no clients associated on 2.4GHz, I discovered that my WAP371 stops transmitting on Radio2 (2.4GHz) while 5GHz works OK. A reboot brings it back to life for a short while. This can be clearly seen with a Wifi analyzer app on the tablet.

 

I do have a schedule, but Scheduler Association shows the radio is enabled:

Capture.PNG

 

This is the schedule. Basically I want it off between 1am and 7am.

Capture.PNG

 

Nothing obvious in the log.

Firmware is 1.3.0.7.

It is powered by an external power supply through the socket.

 

Do I have a hardware problem?

 

1 REPLY 1
Highlighted

Re: WAP371 stops transmitting on Radio 2

Just wondering about the relevance or significance of this. This is almost right after the reboot:

Capture.PNG