Please be advised, the GuideMe Wizard is no longer available on the Small Business Support Community. For search capability please use the community search field to find content related to Cisco Small Business documents, videos, and discussions.
We have AP - A, B and C all configured static and outside of our DHCP scope
A - 104.240
B - 104.241
C - 104.242
WAP A is setup to allow the MAC's of A and B to repeat its signal
The issue starts about 1-2 minutes after I set B and C to client/repeater and select A in site survey then save the settings. Obviously its weird that only our 2003 servers are getting this error
The system detected an address conflict for IP address 192.168.105.201 with the system having network hardware address *MAC ADDRESS OF ROUTER A*. Network operations on this system may be disrupted as a result.
A consumer router may support a virtual private network (VPN) connection, but that's a far cry from the network and security capabilities that a business-class router can provide. All it takes is some IT talent and know-how to set one up. You're hear...
Cisco RV340 Series Secure Router
Security License Features and Performance
Today, secure networking is imperative for every business, even the smallest one. The RV340 series security routers provides business users with advanced connectivity and...
Recorded Live at SpiceWorld 2018!With the increasing complexity of technology lengthy configurations, dealing with multiple vendors, constant updates and maintenance –it can feel like you are navigating an unruly IT jungle. Join Cisco's Amy Blanchard as s...