I just installed a WAP4410N and the laptops that are connected to it are working great. Here is the issue I'm having: due to a strange building layout I'm unable to hard wire my office phones (Cisco 79xx IP phones) to the network. I have the phones connected to laptops through LAN and I have the laptops setup to share their wireless internet connection with the LAN. In the past I was using a WAP200 and this worked without any issues. Since replacing the WAP200 with the WAP4410N, the phones will not stay connected if they even connect at all. I have the latest firmware on the WAP4410N, and I also updated the firmware on all the laptops. Any suggestions on what may be causing this or other setup options?