10-06-2017 06:00 AM - edited 03-12-2019 07:30 AM
When I try run an Discovery they return the error : SNMP Unreachable or Incorrect.
I already check if all switch has the community configured and if this community are correctly typed on collector credential.
And When I run the Discovery
If anyone help me.
Tks so much
Solved! Go to Solution.
10-06-2017 06:03 AM
Can you check from the command-line of the CSPC to validate one of those hosts is really ICMP reachable (ping) and you can manually snmpwalk from the CLI of the CSPC? It could be a route issue or an ACL issue on the devices or a firewall issue blocking access.
10-06-2017 06:03 AM
Can you check from the command-line of the CSPC to validate one of those hosts is really ICMP reachable (ping) and you can manually snmpwalk from the CLI of the CSPC? It could be a route issue or an ACL issue on the devices or a firewall issue blocking access.
10-06-2017 06:10 AM
10-11-2017 02:00 PM
Hello,
Please let us know if you need further assistance. If not, please mark this as solved to close the conversation.
Thanks!
Cheri
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide