cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
955
Views
0
Helpful
5
Replies

Add Nexus to CSPC 2.7.4

muath1987
Level 1
Level 1

Hello Dears

I tried to add Nexus switch 3548 to CSPC when was the running version is 2.5.0, in that time the nexus switch went down i dont know if that was a bug or something else but the whole switch went down, right now the running version is 2.7.4 can i know if i will face the same scenario or is there any bug affecting nexus 3548. Many thanks 

1 Accepted Solution

Accepted Solutions

Thanks for the info. Do you still have any data about the crash? I would recommend opening a TAC case about the crash. We have not seen CSPC cause any issues with the Nexus running that version.

View solution in original post

5 Replies 5

Chris Camplejohn
Cisco Employee
Cisco Employee
What NX-OS version was on the 3548 when you tried with CSPC 2.5 and what version is on it now?

hello Cris

 

here is the version that was running and still on the device

 

#  show ver

Cisco Nexus Operating System (NX-OS) Software

TAC support: http://www.cisco.com/tac

Documents: http://www.cisco.com/en/US/products/ps9372/tsd_products_support_serie

s_home.html

Copyright (c) 2002-2016, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained herein are owned by

other third parties and are used and distributed under license.

Some parts of this software are covered under the GNU Public

License. A copy of the license is available at

http://www.gnu.org/licenses/gpl.html.

 

Software

  BIOS:      version 2.0.6

  loader:    version N/A

  kickstart: version 6.0(2)A8(3)

  system:    version 6.0(2)A8(3)

  Power Sequencer Firmware:

             Module 1: version v2.1

  BIOS compile time:       12/26/2014

  kickstart image file is: bootflash:///n3500-uk9-kickstart.6.0.2.A8.3.bin

  kickstart compile time:  10/28/2016 20:00:00 [10/29/2016 04:50:59]

  system image file is:    bootflash:///n3500-uk9.6.0.2.A8.3.bin

  system compile time:     10/28/2016 20:00:00 [10/29/2016 05:17:12]

 

 

Hardware

  cisco Nexus 3548 Chassis ("48x10GE Supervisor")

  Intel(R) Pentium(R) CPU  @ 2.00GHz with 3794024 kB of memory.

  Processor Board ID FOC20036DAN

 

  Device name: LB-HQ-Agg-SW7

  bootflash:    4014080 kB

 

Kernel uptime is 293 day(s), 18 hour(s), 11 minute(s), 3 second(s)

 

Last reset at 448923 usecs after  Tue Jul 18 12:27:34 2017

 

  Reason: Reset Requested by CLI command reload

  System version: 6.0(2)A8(3)

  Service:

 

plugin

  Core Plugin, Ethernet Plugin

Thanks for the info. Do you still have any data about the crash? I would recommend opening a TAC case about the crash. We have not seen CSPC cause any issues with the Nexus running that version.

unfortunately i don't have the crash file, I will try to add it and see
what will happen :)

Could you please provide me with any bug related to Nexus ?