cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Smart Net Total Care Community!

Our community includes Cisco experts to answer your questions about the Smart Net Total Care (SNTC) portal and CSP-Collector.
Click the navigation links below to access materials for using our service and supported collectors.

257
Views
10
Helpful
6
Replies
Beginner

CSPC Unable to Discover Multiple Devices

Hello,

I am having an issue with my USPC. If I select multiple IPs for discovery, most fail with a "SNMP Unreachable or Incorrect SNMP Credentials.".

If I pick an IP that failed out of the multi IP discovery and discover it individually, it discovers fine. I use all the same settings from the failed discovery.

I have verified that the USPC is hitting the IPs that fail during the multi IP discovery via 'debug snmp packets'.

I am running 2.7.1

Please let me know if you have any questions.


Thank you,

Aaron

Everyone's tags (1)
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Beginner

Jarrett, I sent you a PM.

Jarrett, I sent you a PM.

I looked into it a bit further this AM and it looks like our EngineID was hard coded on the devices I am having issues with. I will have to go ahead and resolve this issue.

Thank you for your help.

6 REPLIES 6
Cisco Employee

Hello ambliven2,

Hello ,

Can you please let me know if you are using SNMP v3 settings or V2?

Thank you,

Jarrett

Beginner

Hello Jarrett,

Hello Jarrett,

We are using SNMP v3.

Beginner

Jarrett,

Jarrett,

I looked at another post of yours... I see where you are going with this.. same engine ID.

Is there a better work around in 2.7.1? I don't show the code that were are running as being affected in the bug search for 'CSCts87275'.

Please let me know how best to proceed.

Cisco Employee

Hi ambliven2,

Hi ambliven2,

Yes, you are correct :) The behavior was similar to what we have seen when encountering non-unique engine IDs across devices.

Would you be able to provide me some additional details about your devices?  OS Version and PID?  You may also send a private message using these steps here as well for these details.

Thank you,

Jarrett

Highlighted
Beginner

Jarrett, I sent you a PM.

Jarrett, I sent you a PM.

I looked into it a bit further this AM and it looks like our EngineID was hard coded on the devices I am having issues with. I will have to go ahead and resolve this issue.

Thank you for your help.

Cisco Employee

Hello ambliven2,

Hello ambliven2,

Thank you for the follow up and great to see it's working for you now!

Thank you,
Jarrett

CreatePlease to create content
Right-rail
Navigation
Be sure to bookmark these support pages and use them in the future to find all the self-help information.
Helpful Links