10-12-2017 11:20 AM - edited 03-12-2019 07:31 AM
After doing the discovery I have many devices with status Generic Device or Unknown, in the report that I export in the status of Reacheable this is false, In those devices already validate the configuration of SNMP and it is configured correctly. The majority are devices that have this status are Cisco Adaptive Security Appliance Software Version 9.4 (2) 3 5555. What do you recommend to review?
Solved! Go to Solution.
10-12-2017 11:48 AM - edited 10-12-2017 12:02 PM
Hello Ernesto here the commands for SNMP walk keep it in mind you have to replace data according to your environment in this case SNMP community
snmpwalk -v 2c -c <snmp-Community> Device IP address
Regards
10-12-2017 11:28 AM
10-12-2017 11:33 AM
Hi
Will you have the snmpwalk command that I can send from CSPC CLI to be able to do the test?
10-12-2017 11:47 AM
10-12-2017 11:48 AM - edited 10-12-2017 12:02 PM
Hello Ernesto here the commands for SNMP walk keep it in mind you have to replace data according to your environment in this case SNMP community
snmpwalk -v 2c -c <snmp-Community> Device IP address
Regards
10-20-2017 02:14 PM
Hi Ernesto,
Please let us know if you need further assistance. If not, mark Accept as Solution to close the conversation.
Cheers,
Cheri
10-23-2017 08:34 AM
Sorry for the delay. We have already reviewed the snmp community configuration for our devices and have already been added correctly. Thanks for the support.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: