cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Smart Net Total Care Community!

Our community includes Cisco experts to answer your questions about the Smart Net Total Care (SNTC) portal and CSP-Collector.
Click the navigation links below to access materials for using our service and supported collectors.

282
Views
5
Helpful
3
Replies
Highlighted

"the exception is https transportmode has failed 404 not found"

Hello

 

I need help with a problem.

 

My client have a problem with the process of export.

When trying make the upload, we have the error 404.

"the exception is https transportmode has failed 404 not found".

 

The FW has been checked. OK

 

Thanks!

 

 

 

 

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

Re: "the exception is https transportmode has failed 404 not found"

 

In deploying the  image  you would have created the cli admin password?  (java based shell authentication is not the same as the GUI)

If so have you also created/activated  the users collectorlogin and root ? (real linux shell)

If not do the following for the cli admin  shell

admin# pwdreset root 90

And

admin# pwdreset collectorlogin 90

it will activate those accounts and generate their passwords  ( keep them where you can refer to them in the future)

after that

Via SSH Login to collector as user collectorlogin and then use command below to connect as root (cannot connect directly)

# su root

and then the following commands :

# sed -i ':a;N;$!ba;s/file/#file/1' /opt/ConcsoTgw/tail-end-gateway-decoupled/bin/run.sh

# sed -i 's/nettools-upload.cisco.com/72.163.7.113/g' /opt/ConcsoTgw/tail-end-gateway-decoupled/conf/csof_config.xml

# service concsotgw restart

# service cspc restart  

Once they are done try the collection profile/upload again and let me know

REF: https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvo43779

 

It is does not work or present a different error please send me the following in Private message

 

# tail -100 /opt/ConcsoTgw/tail-end-gateway-decoupled/bin/CONN_TEG_LOGS/tail-end-gateway.log

# openssl s_client -showcerts -connect concsoweb-prd.cisco.com:443

# tail -100 /opt/ConcsoTgw/tail-end-gateway-decoupled/bin/nohup.out

# wget https://72.163.7.113/HeadEndWebAppServlet/ --no-check-certificate

View solution in original post

3 REPLIES 3
Highlighted
Cisco Employee

Re: "the exception is https transportmode has failed 404 not found"

 

In deploying the  image  you would have created the cli admin password?  (java based shell authentication is not the same as the GUI)

If so have you also created/activated  the users collectorlogin and root ? (real linux shell)

If not do the following for the cli admin  shell

admin# pwdreset root 90

And

admin# pwdreset collectorlogin 90

it will activate those accounts and generate their passwords  ( keep them where you can refer to them in the future)

after that

Via SSH Login to collector as user collectorlogin and then use command below to connect as root (cannot connect directly)

# su root

and then the following commands :

# sed -i ':a;N;$!ba;s/file/#file/1' /opt/ConcsoTgw/tail-end-gateway-decoupled/bin/run.sh

# sed -i 's/nettools-upload.cisco.com/72.163.7.113/g' /opt/ConcsoTgw/tail-end-gateway-decoupled/conf/csof_config.xml

# service concsotgw restart

# service cspc restart  

Once they are done try the collection profile/upload again and let me know

REF: https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvo43779

 

It is does not work or present a different error please send me the following in Private message

 

# tail -100 /opt/ConcsoTgw/tail-end-gateway-decoupled/bin/CONN_TEG_LOGS/tail-end-gateway.log

# openssl s_client -showcerts -connect concsoweb-prd.cisco.com:443

# tail -100 /opt/ConcsoTgw/tail-end-gateway-decoupled/bin/nohup.out

# wget https://72.163.7.113/HeadEndWebAppServlet/ --no-check-certificate

View solution in original post

Highlighted
Cisco Employee

Re: "the exception is https transportmode has failed 404 not found"

 

 

Hello Matias has the steps above resolved the problem? if so please mark this post as resolved.  If you do still have problems after applying those steps and still not working , please send the additional logs mentioned on the post

Highlighted

Re: "the exception is https transportmode has failed 404 not found"

 

Hello Adias.

I had not yet executed the commands with the client.

Thanks for the help, it worked!

 

Everyone's tags (1)
CreatePlease to create content
Right-rail
Navigation
Be sure to bookmark these support pages and use them in the future to find all the self-help information.
Helpful Links