cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

Welcome to the Smart Net Total Care Community!

Our community includes Cisco experts to answer your questions about the Smart Net Total Care (SNTC) portal and CSP-Collector.
Click the navigation links below to access materials for using our service and supported collectors.

145
Views
0
Helpful
3
Replies
Highlighted

SNTC message FAILED: SNAS validated data not available

Hi,


We have a Cisco ASR 1001-X Router that is not correctly reporting in the Smart Net portal correctly. I see the message "FAILED: SNAS validated data not available" under the "Not Recognized" section. Our collector information does show all of the Routers information including the serial number. Does anyone have ideas on how this can be resolved?


Thanks,

Matt

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Re: SNTC message FAILED: SNAS validated data not available

Hey Matt -- it looks like during the latest collection this device failed SNMP from the collector which we need to collect the serial number during this stage. Can you attempt to re-discover this router in the collector and confirm if it is successful? If not you will want to take a look at the SNMP configuration on the device and the CSPC. If everything looks good I would suggest running a new collection and upload so we can verify.

 

Thanks,

Brandon

3 REPLIES 3
Cisco Employee

Re: SNTC message FAILED: SNAS validated data not available

Hey Matt, I'll take a look at this and update you soon.

Cisco Employee

Re: SNTC message FAILED: SNAS validated data not available

Hey Matt -- it looks like during the latest collection this device failed SNMP from the collector which we need to collect the serial number during this stage. Can you attempt to re-discover this router in the collector and confirm if it is successful? If not you will want to take a look at the SNMP configuration on the device and the CSPC. If everything looks good I would suggest running a new collection and upload so we can verify.

 

Thanks,

Brandon

Re: SNTC message FAILED: SNAS validated data not available

Hi,

 

I enabled SNMP and did another collection scan, that worked!

 

Thanks for the help.

Matt

CreatePlease to create content
Right-rail
Navigation
Be sure to bookmark these support pages and use them in the future to find all the self-help information.
Helpful Links