cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1248
Views
15
Helpful
3
Replies

9200 vs 9300 fabric edge

JonathanC1
Level 1
Level 1

Hello All,

 

Looking for some experience or tips. We are looking at buying 9300s over 9200 for fabric edge. It will be 48 port and the majority of ports will be used for Wired + fabric enabled APs. I believe looking at documentation 9300 is the better choice but i see 9200 is supported and obviously cheaper. With the amount of routing requirements from SDA with LISP/VXLAN etc I am leaning on 9300s and have used them as edges in past.

 

Any thoughts exp?

 

Warm Regards

JC

3 Replies 3

Benjamin-A
Level 1
Level 1
 

Hi Jonathan,

 

there is a difference between the C9200 and C9300 in scale and features

C9300 will give you additionally Features:

  • Cisco DNA Services for Bonjour
  • ERSPAN
  • App hosting
  • Wireshark
  • Encrypted Traffic Analytics (ETA)
  • You will be able to extend Fabric Edges with Extended Nodes and Policy Extended Nodes
  • You can add an EWC Role (embedded Wireless Controller)
  • Power Stacking 
  • and maybe I missed some but these are listed at the C9200/C9300 Datasheet

From scale perspective look at this: https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/dna-center/nb-06-dna-center-data-sheet-cte-en.html

 

ScaleC9200C9300LC9300
User Virtual Networks4256256
Endpoints400060006000
Access points directly connected (limited to) 2550NA
Wireless endpoints directly connected (limited to)5001000NA

 

Further more you want to check the lead time these days when an C9200 vs. 9300 will be avialable. 

 

It realy depends on your/your customers environment and budget. C9300L is a good alternativ. Not that expensive as an C9300 and comes with a good feature set which provides great value, so you will be flexible in the future


.:|:..:|:.Please rate helpful posts.:|:..:|:.

9200x9300.JPG

 

Take a look on this table. It might be helpful to take decision. Personal option, I´d go with 9300.

rasmus.elmholt
Level 7
Level 7

If you are going to use it for a fabric the 9300L is much better then the 9200 platform. Improved UADP chip and support for more than 4 VNs.

And with licenses the price between 9300L and 9200 is not that much. Would recommend going with the 9300(L).

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: