Connect C9500-48Y4C 40G uplink to aggregation routers

[peterzhang]

Hello All

I need to connect Nexus 7K/9K router to the 48Y4C switch via 40G. Since these are uplinks by default, can these be connected to the 7K/9K like normal ports? Need to build BGP using routed sub interfaces. We are not using StackWise. 

Thanks

Peter

[mnagired · Accepted solution]

Hello Peter

Firstly, looks like this is at wrong community space as this space is specific to SD Access..

2ndly, yes, both side use standard QSFP interface and i don't see a reason for it to not work. C9500-48Y4C does support sub-interface on all interfaces so you should be good from Catalyst side..