cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
237
Views
20
Helpful
3
Replies
Highlighted
Beginner

Migration to SD-Access

Hello everyone,

I am looking for a guidance on Cisco SD-Access migration from traditional network. I am working on building new SDA fabric physically alongside to legacy network. SDA-access consists of new switches. Once that Sd-access is all setup and happy, then we would incrementally cut over and migrate the users. Migrated Users should be able to talk to servers in old DC network and be able to go to internet through the firewall.  We don't want to do new IP addressing scheme.

Can anyone give step by step guide and migration strategies

Existing setup is

Firewall-----6500 (CORE)---trunk---- 2950 (access switch)

                           |

                     Servers

New network has

9500 as fabric borders ( Stackwise)

9300 as fabric edge.

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Cisco Employee

techno.it,

There are a couple of very good migration sessions in the Cisco Live On-Demand Library:

BRKCRS-2812 : Cisco SD-Access Integrating with Your Existing Network (https://www.ciscolive.com/global/on-demand-library.html?search=BRKCRS-2812&search.event=ciscoliveemea2020#/session/1564677156116001JpyT)

BRKCRS-3493 : Real World Route/Switch to Cisco SD-Access Migration Tools and Strategies (https://www.ciscolive.com/global/on-demand-library.html?search=BRKCRS-3493#/session/1571888607137001yDeW)

I would also take a look at this Best Practices session:

DGTL-BRKCRS-2502 : Best Practices for Design and Deployment of Software Defined Access (SDA) (https://www.ciscolive.com/global/on-demand-library.html?search=BRKCRS-2502#/session/1573153542505001JVhS)

Feel free to reach out if you need additional assistance.

Cheers,

Scott Hodgdon

Senior Technical Marketing Engineer

Enterprise Networking Group

View solution in original post

3 REPLIES 3
Highlighted
Cisco Employee

techno.it,

There are a couple of very good migration sessions in the Cisco Live On-Demand Library:

BRKCRS-2812 : Cisco SD-Access Integrating with Your Existing Network (https://www.ciscolive.com/global/on-demand-library.html?search=BRKCRS-2812&search.event=ciscoliveemea2020#/session/1564677156116001JpyT)

BRKCRS-3493 : Real World Route/Switch to Cisco SD-Access Migration Tools and Strategies (https://www.ciscolive.com/global/on-demand-library.html?search=BRKCRS-3493#/session/1571888607137001yDeW)

I would also take a look at this Best Practices session:

DGTL-BRKCRS-2502 : Best Practices for Design and Deployment of Software Defined Access (SDA) (https://www.ciscolive.com/global/on-demand-library.html?search=BRKCRS-2502#/session/1573153542505001JVhS)

Feel free to reach out if you need additional assistance.

Cheers,

Scott Hodgdon

Senior Technical Marketing Engineer

Enterprise Networking Group

View solution in original post

Highlighted

@Scott Hodgdon 

 

Thanks for sharing the links. I will go through them and update if need any clarifications.

Highlighted

@Scott Hodgdon 

Those Cisco Live links were very helpful. I have got the answers in regards to migration.

 

Thank you very much. Appreciate it.

Content for Community-Ad