Hi Guys, PID: DS-C9148S-K9 Since 5 months ago till now, In my Cisco MDS 9148 16G SAN switch has shown some frequent error logs as below, 2008 Dec 22 08:57:09 PROD-CISCO-SAN-SW2 %PMON-SLOT1-3-RISING_THRESHOLD_REACHED: TX Credit Not Available has reach...
Forum Posts
Hi community, I am a bit stuck and I would appreciate if any of you could help me.I want to get the information equivalent to the command "show flogi database interface XXX" and find for each port if I have any active login but with SNMP, so far I'm ...
I've previously worked on a the Nexus line of products for SAN switching, but now looking at a configuration requirement for a pair of MDS switches. The switches will be in 2 separate locations and connected to each other via fiber interconnects. M...
Is it normal to have "Not avaiable" under connected interface for "show fcns database detail" on a native FC target device?port-wwn (vendor) :10:01:d0:49:ea:52:9a:f0node-wwn :10:00:d0:39:ea:52:8a:f0class :3node-ip-addr :0.0.0.0ipa :ff ff ff ff ff ff ...
I think there is typo on the page Recommended Releases for Cisco MDS 9000 Series Switches I saw 6.2(33) started to work on 9718. Is it typo ? May I request the page owner to correct the page? Thanks! 6.2(33) can only work on 9710,9706 with sup1. No...
Resolved! Does mds 9700 series oem from Brocade?
I heard somebody told me 9700 series oem from brocade？？ I question on this, not heard before. thank you Tom
Hi all, I know there is plenty online about basic vs enhanced, but I can’t seem to find answers to a couple of questions I have about it, hoping someone can help.1. is the ‘zoneset name distribute full’ command a one time thing or does it need to be ...
I'm very new to Cisco MDS in general. Just wondering for the best practice in retrieving the server WWPN to use for a zoning config - is it best to retrieve the ones defined in the HBA FC ports of the server (CIMC) or in the OS layer (Linux, systool ...
We are simply trying to create a device-alias, which we have done many times before without issue, but now we are getting this error on commit: "zone: Device-alias enhanced zone member present"switch-a# config tEnter configuration commands, one per ...
Estimados, buenas tardes. Para una licitación hemos presentado el Cisco MDS 9132T (DS-C9132T-MIK9) con licencia Enterprise (M9100ENT1K9). Ahora, el cliente nos pide información sobre administración de zonificación por web GUI 100% compatible con Wind...
Resolved! MDS - Disruptive Direct upgrade path
hi all,I have MDS 9250i switches running NX-OS 6.2(9) and I would like to upgrade to 8.2.2 during maintenance window. I read Cisco notes saying for NON-disruptive upgrade path is to go to 8.1.1b first then to 8.2.2. Since there are fabric A and B act...
I am trying to figure out if there is a default control-plane policy on the Cisco MDS 9148's? I havent been able to find documentation on it and dont see any options for the show commands.
Hi,Trying to connect to a MDS switch using the ansible.netcommon.httpapi module in order to just run a gather fact via the nxos module.Here's how this basic playbook looks like:---- hosts: switch1gather_facts: noconnection: ansible.netcommon.httpapic...
I've got a fabric containing multiple switches (9700 & 9300's). Currently the 9300 is the principal for a particular VSAN but I'd like for it to be the 9700. I've changed the fcdomain priority on the 9700 which shows in the configured domain but not ...
- FYI : https://www.cisco.com/c/en/us/support/docs/field-notices/722/fn72237.html https://www.cisco.com/c/en/us/support/docs/field-notices/722/fn72223.html M.
