The database process - FMPersist - of Cisco Fabric Manager (3.02a) fails then I can't get it started again.We're running on a Linux server and I'm attaching the FMPersist.log.
Hi,Hopefully someone can help, or at least point me in the direction as to where to look to fix this problem. On our site we have a couple of 9509 switches with the DS-X9308-SMIP IPS module, which we use to connect to some exposed LUN's on a HP EVA50...
I added a second switch on our fabric to use "Call-Home" and enabled CFS for Call-Home. I get the following error message, when I try and send a test, it worked fine before the second switch was added."callhome:warning:no callhome message sent"Thanks...
Hello - we would be connecting two 9509's, situated in different buildings across the street, with three LW SFPs in each switch. Besides plugging them in (into three adjacent ports), is there anything special that needs to be done? After plugging the...
Hi All,I am new to MDS 9000. I am setting up an Environment for Replication. I have following basics questions1. The customer has bought MDS9216i and he didn?t receive any additional licenses along with the pack ..Do we need any extra license for SA...
Hey Guys,does anyone know if the new 9134 supports IVR? The 9124 does not and it seems the 9134 has a very similar architecture.The available documentation talks about VSANs but does not mention IVR at all...Michael
As I am relatively new to Cisco switches but have used Qlogic for quite some time, I found Cisco's idea of hard and soft zoning reversed. Eg, to me a soft zone is port zoning and a hard zone is WWN zoning. But the MDS training notes have exactly th...
Guys, As above. Anyone got any idea? I know that the MSFC3 has got 500k PPS performance. However, does this translate to IOS SLB performance with NAT i.e. directed mode? I ask since the config guides state that directed mode is not hardware accele...
I am familiar with logging into the MDS9xxx device with telnet and copying files off to an external server via tftp and the like.Is it possible to drive this functionality from the external server, rather then the MDS9xxx device?I would like to be ab...
I had a look what was on offer at Networkers @ Brisbane and considering I am purely a SAN person now, there is not much there for me. All I saw was two sessions that covered everything I know. Its a pity as there should be full three day SAN Breako...
We have one Fabric with one 9509 here & another at the remote site. I want to bring the remote 9509 here and then put two 9216I at the remote site and then spilt the one fabric into two.My question is, what would I have to do to the remote 9509, when...
We ordered a MDS 9509 for one of our customers. We were shipped a MDS 9506 by mistake. Now we are in the process of swapping just the frame & power supplies because the rest of the configuration is right. My question is will the supervisor modules fr...
I'm using a pair of MDS 9216. I just set them up a couple days ago. When I start the Fabric Manger, at the top it says that it will expire in 58 days. Do I need to obtain a license for it. I thought device manager and fabric manager are free.Than...
