Cisco MDS 9000 series in High Availability

[sarumanoj]

Hi All,

I have two Cisco MDS 9148 Multilayer Fabric Switch and I want to configure HA(High Availability) in this switch.

Any Suggestion on this would be much helpful.

[balaji.bandi]

here is the guide to understand how to deploy :

https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9100-series-multilayer-fabric-switches/whitepaper-c11-737768.html

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/8_x/config/ha/cisco_mds9000_ha_config_guide_8x.pdf

[sarumanoj]

Hi Balaji,

I have gone through provided link, but command for High Availability does not work in this MDS 9148 series.

Command is boot auto-copy.