ANNOUNCEMENT - The community will be down for maintenace this Thursday August 13 from 12:00 AM PT to 02:00 AM PT. As a precaution save your work.
cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
191
Views
0
Helpful
1
Replies
Highlighted

Cisco MDS 9148 All Interfaces Are Down "Link Failure or NotConnected"

Hi,

 

I just installed a new Cisco MDS 9148 Switch and connected all our other devices using fiber to the switch, but for some reason none of the interfaces come up once the devices are connected. I made sure all of the interfaces are enabled and are assigned to a VSAN. Other than creating a VSAN and enabling the interfaces, the switch still has it's default configurations.

 

Would there be any additional configurations to add to the interfaces or globally to the switch itself, I've never worked on this type of switch before.

1 REPLY 1
Highlighted
Rising star

Re: Cisco MDS 9148 All Interfaces Are Down "Link Failure or NotConnected"

Hi @brandonsmith0094 

Can you share the output of the "show interface fc x/y brief" "show interface fc x/y transceiver details" for the interfaces which should be up?

 

Regards,

Sergiu

This widget could not be displayed.