Cisco Nexus 5548UP and Brocade 6505 interoprability
I have a query related to interoperability between Cisco Nexus 5548UP and Brocade 6505 (Fabric OS version is v8.0.2c). My requirement is to connect Brocade FC switch to Nexus 5548UP and use Nexus to convert FC to FCOE.
one of the requirement from the Brocade is to connect Cisco switches as N-Port Virtualizer (NPV) mode to connect to Brocade switches. Cisco NP ports connect to Brocade F_Ports. E_Port connectivity is not supported.
Would this setup work and is there is an configuration example on Nexus 5548UP that can used.
How does everyone feel about service graphs in a brownfield network centric cutover? maybe I'm an old school engineer but I was taught that if you have to do a Pbr then your design is wrong. they are a pain to troubleshoot because you always f...
To participate in this event, please use the button to ask your questions
This special event - formerly known as Ask the Expert- is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are acce...
Going to Cisco LIVE EMEAR 2020? Give your Data Center agenda a boost with these top recommended sessions. Register and join us!
Data Center Networking:
From Reactive to Proactive NetOps With Cisco Network Assurance and Insights- The Power of Data...
Hi allWe're trying to tackle a DHCP relay problem between a set of N9K-C9332PQ (NXOS 9.3.2) and dnsmasq (doesn't work) resp Windows 2016 DHCP service (works with some tweaking).SITUATION:We have a BGP EVPN VXLAN (L2VNI and L3VNI) with anycast gateway setu...