01-18-2018 11:02 PM - edited 03-01-2019 06:17 AM
Hi every one.
is its posible to connect directly my tape library quantum and my VTL quantum throught FCP to my FI6324?
if not. which is the best way to doit and who will create de corrects vsan or zoning for this scenario.
thank you
Solved! Go to Solution.
01-22-2018 11:48 AM
Yes, correct ! Connect each MDS with a UCS FI, building a dual FC fabric ! You will create a VSAN on each fabric (e.g. 10 on fabric A, 11 on fabric B) and then do FC zoning in each VSAN and fabric.
01-20-2018 12:41 AM
check the proper interop matrix https://ucshcltool.cloudapps.cisco.com/public/, and you will find that
01-20-2018 02:46 PM
thanks for the info.
what i should choose in the operatibility matrix (1- Servers 2- Operative System 3- Products).
just for donwload de notes for our client.
regards
01-21-2018 12:40 AM
01-21-2018 03:28 PM
thank now i got the summary.
in conclution between the FI6324 UCS mini and the tape library i need a MDS switch?
in my desing im using :
*-chassis blade with FI6324
*-4 blades BM200 M4 with VIC1340.
*-2 MDS 9132.
*-conect the MDS 9132 wth SFP 8Gbps FC with Fiber Optic cables LC-LC.
*- connect the Quantum Scalar I3 through the MDS with the FI6324 UCS Mini with cable LC-LC OM4 and SFP8Gbps FC.
you think that would i have a problem in the installation moments?
01-22-2018 11:48 AM
Yes, correct ! Connect each MDS with a UCS FI, building a dual FC fabric ! You will create a VSAN on each fabric (e.g. 10 on fabric A, 11 on fabric B) and then do FC zoning in each VSAN and fabric.
07-29-2018 11:46 PM
Hi Walter
I am trying to P2V my backup server which has a tape library connected to it. Below is my setup
Please refer to my post and advise
07-30-2018 12:25 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide