I have Cisco UCS (6 blades - all boot from SAN) connected to NetApp Storage FC Mode thorugh MDS 9000 SAN Switch
Everything works smoothly, but I recently decided to use Blade 6 for testing purposes without touching the current LUN intended for the boot blade so I turned off the LUN from NetAPP and created a new LUN and assigned to same
initiator , but I had a problem that the Boot was not working on well (I can see it & install the OS but not booting)
anyhow,, I suspect that the problem from MDS.. flogi/fcns database cache seems it need to be updated/refresh my question is there a way to update/clear/refresh flogi / fcns database on MDS?
without reconfigure the member of the zone, like no member and bla bla ....
Transforming Day 2 Ops with Cisco Data Center Network Assurance and Insights
Live webinar: Network Insider Series
Wednesday, July 15, 202010:00 AM Pacific Standard Time (San Francisco, GTM -08:00) Driven by the growth of applications, deluge of data and t...
Hi All,i am going to deploy Hyperflex with Vmware for Testing Purposes.Are there CLI commands to do a factory reset of a new Hyperflex system and rebuild hyper flex again?is there any procedure for rebuild Hyperflex?
Hi,Does the "Cisco’s Massively Scalable Data Center Network Fabric" (MSDC) Architecture be managed by ACI ?I mean can the physical topology of the ACI network be a MSDC network?Cisco’s Massively Scalable Data Center Network Fabric White Paperhttps://www.c...
You have an extra week of fun! Capture the Flag has been extended through July 17. Register using the links below.
As a part of Cisco Live US auxiliary programs, we invite you to learn new technologies and obtain hands-on experience in a fun w...