12-22-2015 10:57 PM
Hi experts,
We are try to enable fcsp feature. But console show "ERROR: service not found". What's problem is?
Best regards,
Meng-Yuan Hsieh (Nick)
01-06-2016 09:47 AM
01-06-2016 11:21 AM
I see that your date / time is totally off: Mon Jun 19 11:54:12 2000
Can you please correct this.
01-10-2016 10:28 AM
Clock have corrected. But fuction still can not enable.
01-10-2016 11:47 PM
did you install
kickstart: m9250-s5ek9-kickstart-mz.6.2.13b.bin
nxos: m9250-s5ek9-mz.6.2.13b.bin
and it is still not working ??
01-06-2016 11:42 AM
Hi,
The switch is running No payload encryption (NPE) images NX-OS.
show version
kickstart image file is: bootflash:///m9250-s5ek9-kickstart-mz-npe.6.2.7.bin
system image file is: bootflash:///m9250-s5ek9-mz-npe.6.2.7.bin
Can you install the regular NX-OS?
Regards,
David
01-06-2016 05:56 PM
Hi David,
I found the newest software in Cisco website as below. Is it right?
kickstart: m9250-s5ek9-kickstart-mz.6.2.9c.bin
nxos: m9250-s5ek9-mz.6.2.9c.bin
01-06-2016 11:08 PM
Yes !!
01-07-2016 05:32 AM
12-26-2015 07:32 AM
Hi Meng
To verify that the "Enterprise License" is properly installed, enable e.g. feature ivr, which requires this license as well.
If this works, please read my next reply !
switch(config)# feature ivr
12-23-2015 08:28 PM
Our device is MDS9250i. We can found FC-SP in data sheet.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide