cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

200
Views
0
Helpful
2
Replies
Beginner

Fabric Manager discovery

Hi all,

Can anyone tell me how Fabric Manager does its discovery of the SAN fabric and is there a command line equivalent e.g. equivalent to CDP?     I need to make a network map of the switch connectivity if possible?

 

thanks

 

Chris

1 ACCEPTED SOLUTION

Accepted Solutions
Cisco Employee

Hi Chris,I usually use ...

Hi Chris,

I usually use ...

 

For switches with Domain ID's:
show fcs ie   (gives all switches with domain id's in the vsan)
              Loc = Local (this switch)
              Adj = Adjacent (directly connected and in the output of 'show topology')
              Rem = Remote (more than one hop away)


show topology (gives ISLs for E_Ports)

show fcns database | i npv|VSAN (lists npv switches their fcid and VSAN)

show fcns data fcid <fcid> detail vsan x  (lists the switch and interface at the bottom)


For NPV switches:
show npv flogi
The right hand side of the output lists the upstream interfaces

 

Regards,

David

2 REPLIES 2
Cisco Employee

Hi Chris,I usually use ...

Hi Chris,

I usually use ...

 

For switches with Domain ID's:
show fcs ie   (gives all switches with domain id's in the vsan)
              Loc = Local (this switch)
              Adj = Adjacent (directly connected and in the output of 'show topology')
              Rem = Remote (more than one hop away)


show topology (gives ISLs for E_Ports)

show fcns database | i npv|VSAN (lists npv switches their fcid and VSAN)

show fcns data fcid <fcid> detail vsan x  (lists the switch and interface at the bottom)


For NPV switches:
show npv flogi
The right hand side of the output lists the upstream interfaces

 

Regards,

David

Highlighted
Beginner

Hi, Thanks, thats the sort of

Hi,

 

Thanks, thats the sort of info I'm after!

Chris

CreatePlease to create content
Content for Community-Ad
August's Community Spotlight Awards