cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

12522
Views
5
Helpful
4
Replies
abhiasabhi
Beginner

How to factory default cisco MDS 9222i

How to factory default cisco MDS 9222i

4 REPLIES 4
dakester
Cisco Employee

Hi,

write erase

write erase boot

reload

(If prompted to save run to start, say no)

http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/4_1/configuration/guides/cli_4_1/bb.html#wp1087208

Regards,

David

Hi, Thanks for response...

One more thing.... I dont want the erase the management IP address , rest everything should revert to factory default, because i am doing it remotely i need to login... is there any way to accomplish this.

Thanks

Abhilash

If I do "write erase" whether this will erase the username / password also...

it will erase your password.

if you don't want to erase every thing, what you can do is, open  you configuration with notepad and put "no" in front of the  configuration line. and then paste it to the switch under configuration mode