IBM Blade Centers not seeing Storage after moving from Brocade to Cisco Core
We recently moved the Physical Cables from Brocade 48K to Cisco Cores. After moving this We converted the brocade switches in the Blade Center as Access Gateway which is Cisco NPV mode. Servers are able to login to the Cisco and We see Fabric id for the wwn. But They dont login to the Storage frame. The other HBA is still on the Brocade core and see the disks from different storage frames.
Any one has seen this issue. Any suggestions would be great help.
Blade->Brocade Switch(access gatewaymode>-->Cisco MDS 9710-->storage. This is how the connection on the Cisco Fabric.
How does everyone feel about service graphs in a brownfield network centric cutover? maybe I'm an old school engineer but I was taught that if you have to do a Pbr then your design is wrong. they are a pain to troubleshoot because you always f...
To participate in this event, please use the button to ask your questions
This special event - formerly known as Ask the Expert- is open only to Cisco Customers and Partners.
Many pages in the Cisco Community are acce...
Going to Cisco LIVE EMEAR 2020? Give your Data Center agenda a boost with these top recommended sessions. Register and join us!
Data Center Networking:
From Reactive to Proactive NetOps With Cisco Network Assurance and Insights- The Power of Data...
Hi allWe're trying to tackle a DHCP relay problem between a set of N9K-C9332PQ (NXOS 9.3.2) and dnsmasq (doesn't work) resp Windows 2016 DHCP service (works with some tweaking).SITUATION:We have a BGP EVPN VXLAN (L2VNI and L3VNI) with anycast gateway setu...
Membership in the Cisco Customer Connection program is required to attend. Registration is free and easy to complete. During registration, choose the Data Center track. Once your membership is approved, you'll be able to register for thi...