INTEROP MDS9000 series NX-OS 5.2.2d with Brocade 5100

[gilles.slama]

                   Hi

We project upgrading MDS95XX from 4.1.3a to 5.2.2d.

A Vsan interoperability mode 3 is connected with Brocade 5100 firmware 6.4.1

I can' t find in interoperability matrix between these 2 switches

Can you send me a link to the interoprability matrix or give me  an answer

Best regards

[Daniel Laden]

The interoperabilty matrix is found here:

Table 6-1 Switch Interoperability Matrix

http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/interoperability/matrix/Matrix5.html

I did not see your combination of firmware.

"Note

If  a desired combination of a Cisco MDS NX-OS software version and a  Brocade or McData switch does not appear in this section, submit a Cisco  Configuration Request (CCR) to have the combination validated before  deploying that combination. Click here to download the CCR form. "

Thank You,

Dan Laden

Cisco PDI Data Center

Want to know more about how PDI can assist you?

http://www.youtube.com/watch?v=4BebSCuxcQU&list=PL88EB353557455BD7

http://www.cisco.com/go/pdihelpdesk