09-21-2017 09:03 AM - edited 03-01-2019 06:15 AM
Dear all,
In order to setup an architecture, I am trying to configure a LAB with 2 MDS switches 9148 and a FibreChannel 8 tester.
That works perfectly if I use only 1 switch (alone 192.168.1.87). My Tester is connected between port fc1/1 and fc1/2.
I can monitor the traffic on port fc1/3. Everything is fine.
But I have trouble to connect the both MDS switches together.
The goal would be to allow the traffic between the MDS (192.168.1.87) port fc1/1 and the MDS (192.168.1.88) port fc1/2 using a trunk on fc1/15 (for both switches)
The traffic is not going through.
Please find bellow the both configuration. I'm sure it's just a small mistake on the configuration
MDS 192.168.1.87
!Command: show running-config !Time: Thu Sep 21 17:52:13 2017 version 6.2(15) power redundancy-mode redundant feature npiv role name default-role description This is a system defined role and applies to all users. rule 5 permit show feature environment rule 4 permit show feature hardware rule 3 permit show feature module rule 2 permit show feature snmp rule 1 permit show feature system username admin password 5 $1$DkUa35Ey$3qxuSy1ei3pKzkVsTSC7n. role network-admin no password strength-check ip domain-lookup ip host 192.168.1.87 192.168.1.87 aaa group server radius radius snmp-server user admin network-admin auth md5 0x132b8a08d2d0f6fe3ec160ea631a83d9 priv 0x132b8a08d2d0f6fe3ec160ea631a8 3d9 localizedkey rmon event 1 log trap public description FATAL(1) owner PMON@FATAL rmon event 2 log trap public description CRITICAL(2) owner PMON@CRITICAL rmon event 3 log trap public description ERROR(3) owner PMON@ERROR rmon event 4 log trap public description WARNING(4) owner PMON@WARNING rmon event 5 log trap public description INFORMATION(5) owner PMON@INFO vsan database vsan 55 name "LABVSAN" fcdomain fcid database vsan 1 wwn 10:00:00:00:00:01:00:01 fcid 0xd50000 dynamic vsan 1 wwn 10:00:00:00:00:02:00:01 fcid 0xd50100 dynamic vsan 1 wwn 20:02:54:7f:ee:c6:77:18 fcid 0xd50200 area dynamic vsan 1 wwn 20:01:54:7f:ee:c6:77:18 fcid 0xd50300 area dynamic vsan 55 wwn 10:00:00:00:00:01:00:01 fcid 0x6a0000 dynamic vsan 55 wwn 10:00:00:00:00:02:00:01 fcid 0x6a0100 dynamic interface mgmt0 ip address 192.168.1.87 255.255.255.0 vsan database vsan 55 interface fc1/1 vsan 55 interface fc1/2 vsan 55 interface fc1/3 vsan 55 interface fc1/4 vsan 55 interface fc1/15 line console line vty boot kickstart bootflash:/m9100-s3ek9-kickstart-mz.6.2.15.bin boot system bootflash:/m9100-s3ek9-mz.6.2.15.bin interface fc1/1 switchport mode F interface fc1/2 switchport mode F interface fc1/3 switchport mode SD interface fc1/4 switchport mode SD interface fc1/5 interface fc1/6 interface fc1/7 interface fc1/8 interface fc1/9 interface fc1/10 interface fc1/11 interface fc1/12 interface fc1/13 interface fc1/14 interface fc1/15 switchport mode E interface fc1/16 interface fc1/17 interface fc1/18 interface fc1/19 interface fc1/20 interface fc1/21 interface fc1/22 interface fc1/23 interface fc1/24 interface fc1/25 interface fc1/26 interface fc1/27 interface fc1/28 interface fc1/29 interface fc1/30 interface fc1/31 interface fc1/32 interface fc1/33 interface fc1/34 interface fc1/35 interface fc1/36 interface fc1/37 interface fc1/38 interface fc1/39 interface fc1/40 interface fc1/41 interface fc1/42 interface fc1/43 interface fc1/44 interface fc1/45 interface fc1/46 interface fc1/47 interface fc1/48 !Active Zone Database Section for vsan 55 zone name LAB vsan 55 member pwwn 10:00:00:00:00:01:00:01 member pwwn 10:00:00:00:00:02:00:01 zoneset name zoneset_vsan55 vsan 55 member LAB zoneset activate name zoneset_vsan55 vsan 55 do clear zone database vsan 55 !Full Zone Database Section for vsan 55 fcalias name LABALIAS vsan 55 member pwwn 10:00:00:00:00:01:00:01 fcalias name LABALIAS2 vsan 55 member pwwn 10:00:00:00:00:02:00:01 zone name LAB vsan 55 member pwwn 10:00:00:00:00:01:00:01 member pwwn 10:00:00:00:00:02:00:01 member fwwn 20:0f:54:7f:ee:a7:c8:e0 member fwwn 20:0f:54:7f:ee:c6:77:18 member fcalias LABALIAS member fcalias LABALIAS2 zoneset name zoneset_vsan55 vsan 55 member LAB interface fc1/1 port-license acquire no shutdown interface fc1/2 port-license acquire no shutdown interface fc1/3 port-license acquire no shutdown interface fc1/4 port-license acquire no shutdown interface fc1/5 port-license acquire interface fc1/6 port-license acquire interface fc1/7 port-license acquire interface fc1/8 port-license acquire interface fc1/9 port-license acquire interface fc1/10 port-license acquire interface fc1/11 port-license acquire interface fc1/12 port-license acquire interface fc1/13 switchport trunk allowed vsan 55 port-license acquire interface fc1/14 port-license acquire interface fc1/15 switchport trunk allowed vsan 55 port-license acquire no shutdown interface fc1/16 port-license acquire interface fc1/17 interface fc1/18 interface fc1/19 interface fc1/20 interface fc1/21 interface fc1/22 interface fc1/23 interface fc1/24 interface fc1/25 interface fc1/26 interface fc1/27 interface fc1/28 interface fc1/29 interface fc1/30 interface fc1/31 interface fc1/32 interface fc1/33 interface fc1/34 interface fc1/35 interface fc1/36 interface fc1/37 interface fc1/38 interface fc1/39 interface fc1/40 interface fc1/41 interface fc1/42 interface fc1/43 interface fc1/44 interface fc1/45 interface fc1/46 interface fc1/47 interface fc1/48 ip default-gateway 192.168.1.1 span session 1 destination interface fc1/3 source interface fc1/1 rx
MDS 192.168.1.88
!Command: show running-config !Time: Thu Sep 21 15:22:40 2017 version 6.2(15) power redundancy-mode redundant feature npiv role name default-role description This is a system defined role and applies to all users. rule 5 permit show feature environment rule 4 permit show feature hardware rule 3 permit show feature module rule 2 permit show feature snmp rule 1 permit show feature system username admin password 5 $1$i.olFCUt$Drx3XjKZ5kqhBpckYDmkp1 role network-admin ip domain-lookup ip host 192.168.1.88 192.168.1.88 aaa group server radius radius snmp-server user admin network-admin auth md5 0x76942a05ad356714662f3fb384f4d59d priv 0x76942a05ad356714662f3fb384f4d 59d localizedkey rmon event 1 log trap public description FATAL(1) owner PMON@FATAL rmon event 2 log trap public description CRITICAL(2) owner PMON@CRITICAL rmon event 3 log trap public description ERROR(3) owner PMON@ERROR rmon event 4 log trap public description WARNING(4) owner PMON@WARNING rmon event 5 log trap public description INFORMATION(5) owner PMON@INFO vsan database vsan 55 name "LABVSAN" fcdomain fcid database vsan 55 wwn 10:00:00:00:00:01:00:01 fcid 0x070000 dynamic interface mgmt0 ip address 192.168.1.88 255.255.255.0 vsan database vsan 55 interface fc1/1 vsan 55 interface fc1/15 line console line vty boot kickstart bootflash:/m9100-s3ek9-kickstart-mz.6.2.15.bin boot system bootflash:/m9100-s3ek9-mz.6.2.15.bin interface fc1/1 switchport mode F interface fc1/2 switchport mode F interface fc1/3 switchport mode SD interface fc1/4 switchport mode SD interface fc1/5 interface fc1/6 interface fc1/7 interface fc1/8 interface fc1/9 interface fc1/10 interface fc1/11 interface fc1/12 interface fc1/13 interface fc1/14 interface fc1/15 interface fc1/16 interface fc1/17 interface fc1/18 interface fc1/19 interface fc1/20 interface fc1/21 interface fc1/22 interface fc1/23 interface fc1/24 interface fc1/25 interface fc1/26 interface fc1/27 interface fc1/28 interface fc1/29 interface fc1/30 interface fc1/31 interface fc1/32 interface fc1/33 interface fc1/34 interface fc1/35 interface fc1/36 interface fc1/37 interface fc1/38 interface fc1/39 interface fc1/40 interface fc1/41 interface fc1/42 interface fc1/43 interface fc1/44 interface fc1/45 interface fc1/46 interface fc1/47 interface fc1/48 !Active Zone Database Section for vsan 55 zone name LAB vsan 55 member pwwn 10:00:00:00:00:01:00:01 zoneset name zoneset_vsan55 vsan 55 member LAB zoneset activate name zoneset_vsan55 vsan 55 do clear zone database vsan 55 !Full Zone Database Section for vsan 55 fcalias name LABALIAS vsan 55 member pwwn 10:00:00:00:00:01:00:01 fcalias name LABALIAS2 vsan 55 member pwwn 10:00:00:00:00:02:00:01 zone name LAB vsan 55 member pwwn 10:00:00:00:00:01:00:01 member pwwn 10:00:00:00:00:02:00:01 member fcid 0x6a0100 member fcid 0x070000 member fcalias LABALIAS member fcalias LABALIAS2 zoneset name zoneset_vsan55 vsan 55 member LAB interface fc1/1 port-license acquire no shutdown interface fc1/2 port-license acquire no shutdown interface fc1/3 port-license acquire interface fc1/4 port-license acquire interface fc1/5 port-license acquire interface fc1/6 port-license acquire interface fc1/7 port-license acquire interface fc1/8 port-license acquire interface fc1/9 port-license acquire interface fc1/10 port-license acquire interface fc1/11 port-license acquire interface fc1/12 port-license acquire interface fc1/13 no switchport trunk allowed vsan all port-license acquire interface fc1/14 port-license acquire interface fc1/15 switchport trunk allowed vsan 55 port-license acquire no shutdown interface fc1/16 port-license acquire interface fc1/17 interface fc1/18 interface fc1/19 interface fc1/20 interface fc1/21 interface fc1/22 interface fc1/23 interface fc1/24 interface fc1/25 interface fc1/26 interface fc1/27 interface fc1/28 interface fc1/29 interface fc1/30 interface fc1/31 interface fc1/32 interface fc1/33 interface fc1/34 interface fc1/35 interface fc1/36 interface fc1/37 interface fc1/38 interface fc1/39 interface fc1/40 interface fc1/41 interface fc1/42 interface fc1/43 interface fc1/44 interface fc1/45 interface fc1/46 interface fc1/47 interface fc1/48 ip default-gateway 192.168.1.1 switch#
On MDS 192.168.1.88 everything looks fine and UP
switch(config-zone)# do sh int brie ------------------------------------------------------------------------------- Interface Vsan Admin Admin Status SFP Oper Oper Port Mode Trunk Mode Speed Channel Mode (Gbps) ------------------------------------------------------------------------------- fc1/1 55 F on up swl F 8 -- fc1/2 1 F on notConnected swl -- -- -- fc1/3 1 SD -- down swl -- -- -- fc1/4 1 SD -- down swl -- -- -- fc1/5 1 auto on down swl -- -- -- fc1/6 1 auto on down swl -- -- -- fc1/7 1 auto on down swl -- -- -- fc1/8 1 auto on down swl -- -- -- fc1/9 1 auto on down swl -- -- -- fc1/10 1 auto on down swl -- -- -- fc1/11 1 auto on down swl -- -- -- fc1/12 1 auto on down swl -- -- -- fc1/13 1 auto on down swl -- -- -- fc1/14 1 auto on down swl -- -- -- fc1/15 55 E on trunking swl TE 8 -- fc1/16 1 auto on down swl -- -- -- fc1/17 1 auto on sfpAbsent -- -- -- -- fc1/18 1 auto on sfpAbsent -- -- -- -- fc1/19 1 auto on sfpAbsent -- -- -- -- fc1/20 1 auto on sfpAbsent -- -- -- -- fc1/21 1 auto on sfpAbsent -- -- -- -- fc1/22 1 auto on sfpAbsent -- -- -- -- fc1/23 1 auto on sfpAbsent -- -- -- -- fc1/24 1 auto on sfpAbsent -- -- -- -- fc1/25 1 auto on sfpAbsent -- -- -- -- fc1/26 1 auto on sfpAbsent -- -- -- -- fc1/27 1 auto on sfpAbsent -- -- -- -- fc1/28 1 auto on sfpAbsent -- -- -- -- fc1/29 1 auto on sfpAbsent -- -- -- -- fc1/30 1 auto on sfpAbsent -- -- -- -- fc1/31 1 auto on sfpAbsent -- -- -- -- fc1/32 1 auto on sfpAbsent -- -- -- -- fc1/33 1 auto on sfpAbsent -- -- -- -- fc1/34 1 auto on sfpAbsent -- -- -- -- fc1/35 1 auto on sfpAbsent -- -- -- -- fc1/36 1 auto on sfpAbsent -- -- -- -- fc1/37 1 auto on sfpAbsent -- -- -- -- fc1/38 1 auto on sfpAbsent -- -- -- -- fc1/39 1 auto on sfpAbsent -- -- -- -- fc1/40 1 auto on sfpAbsent -- -- -- -- fc1/41 1 auto on sfpAbsent -- -- -- -- fc1/42 1 auto on sfpAbsent -- -- -- -- fc1/43 1 auto on sfpAbsent -- -- -- -- fc1/44 1 auto on sfpAbsent -- -- -- -- fc1/45 1 auto on sfpAbsent -- -- -- -- fc1/46 1 auto on sfpAbsent -- -- -- -- fc1/47 1 auto on sfpAbsent -- -- -- -- fc1/48 1 auto on sfpAbsent -- -- -- -- ------------------------------------------------------------------------------- Interface Status Speed (Gbps) ------------------------------------------------------------------------------- sup-fc0 up 1
Any idea of the root cause ?
Thanks per advance for your reply.
Best regards
Arnaud
Solved! Go to Solution.
09-26-2017 01:51 AM
The trunk interfaces don't need to be zoned !
Please delete all the zone's and zoneset on each switch and then start from scratch.
The ISL should be up and working !
Then connect your end device and do a
show flogi database vsan 55 on each switch
or
show fcns database vsan 55 on one switch
On one switch you do !!!!!!
configure the zone(s)
a zone should have 2 members (one initiator, one target)
the zone members should be based on pwwn, NOT fcid, or interface
then create a zoneset and add the zones
This configuration is automatically pushed over the ISL link to the other switch
then activate the zoneset
09-26-2017 02:05 AM - edited 09-26-2017 02:05 AM
You're right.
That works now.
Thanks so much for your help. I really appreciated :)
Have a nice week.
Arnaud
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide