Folks,
I did a quick seach and couldn't find anything definative. I have 4 cisco MDS 9100 switches. One has recently shown us a orange powersupply light on the front. However when I look at show hardware I don't see any bad modules....
We are ordering a new powersupply, but I wonder if I am overlooking something. Anyone run into this?
Wow just as I was writing this post the switch popped this into the log:
2013 Apr 18 14:44:02 newsan-sw2 %PLATFORM-2-PS_FANOK: Fan in Power supply 2 ok
2013 Apr 18 14:44:03 newsan-sw2 %PLATFORM-2-PS_FANFAIL: Fan in Power supply 2 failed
I guess the unit it failing then working for bit... but it won't show up in show hardware:
Chassis has 2 Slots for Power Supplies
---------------------------------------
PS in slot A is ok
Power supply type is "300.00W 110v AC"
Model number is DS-CAC-300W
H/W version is 1.0
Part Number is 341-0087-03
Part Revision is B0
Manufacture Date is Year 10 Week 36
Serial number is PAC1036269Y
CLEI code is
PS in slot B is ok
Power supply type is "300.00W 110v AC"
Model number is DS-CAC-300W
H/W version is 1.0
Part Number is 341-0087-03
Part Revision is B0
Manufacture Date is Year 10 Week 36
Serial number is PAC10362680
CLEI code is
-----------------------------------
Chassis has 2 slots for Fan Module
-----------------------------------
Fan module 1 is ok
Fan module 2 is ok
