cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1318
Views
0
Helpful
2
Replies

Nexus 5010P-BF does not load system image

aotholland
Level 1
Level 1

Hi experts,

We have a N5K-C50510P-BF. When these nexus starts that didn't booting any further than the kickstart. Here's the boot sequence log

User break into bootloader

Loader Version pr-1.3

loader>

loader> boot bootflash:n5000-uk9-kickstart.5.2.1.N1.3.bin

Booting kickstart image: bootflash:n5000-uk9-kickstart.5.2.1.N1.3.bin....

...............................................................................

........................Image verification OK

<FF>serial 00:04: unable to assign resources

INIT: platform_type cmdline parameter not found. Asssuming Oregon.

I2C - Mezz absent

Starting Nexus5010 POST...

  Executing Mod 1 1 SEEPROM Test......done

  Executing Mod 1 1 GigE Port Test.......done

  Executing Mod 1 1 Inband GigE Test.....done

  Executing Mod 1 1 NVRAM Test....done

  Executing Mod 1 1 PCIE Test...............................done

  Mod 1 1 Post Completed Successfully

POST is completed

can't create lock file /var/lock/mtab~185: No such file or directory (use -n flag to override)

nohup: redirecting stderr to stdout

autoneg unmodified, ignoring

autoneg unmodified, ignoring

Checking all filesystems..... done.

Loading system software

No system image INIT: Sending processes the TERM signal !!! --

INIT: Sending processes the KILL signal

Cisco Nexus Operating System (NX-OS) Software

TAC support: http://www.cisco.com/tac

Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained in this software are

owned by other third parties and used and distributed under

license. Certain components of this software are licensed under

the GNU General Public License (GPL) version 2.0 or the GNU

Lesser General Public License (LGPL) Version 2.1. A copy of each

such license is available at

http://www.opensource.org/licenses/gpl-2.0.php and

http://www.opensource.org/licenses/lgpl-2.1.php

switch(boot)#

switch(boot)# sho ver

Cisco Nexus Operating System (NX-OS) Software

TAC support: http://www.cisco.com/tac

Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained in this software are

owned by other third parties and used and distributed under

license. Certain components of this software are licensed under

the GNU General Public License (GPL) version 2.0 or the GNU

Lesser General Public License (LGPL) Version 2.1. A copy of each

such license is available at

http://www.opensource.org/licenses/gpl-2.0.php and

http://www.opensource.org/licenses/lgpl-2.1.php

Software

  kickstart: version 5.2(1)N1(3)

  kickstart image file is: bootflash:/n5000-uk9-kickstart.5.2.1.N1.3.bin

  kickstart compile time:  12/4/2012 1:00:00 [12/04/2012 09:53:21]

Hardware

  RAM 3619880 kB

  bootflash:  4030464 kB

--More--

(none)   kernel uptime is 0 days 0 hour 1 minute(s) 42 second(s)

I try to load the system image

switch(boot)# load bootflash:n5000-uk9.5.2.1.N1.3.bin

****************INIT: Sending processes the TERM signal

switch(boot)# INIT:

INIT: Sending processes the TERM signal

INIT: Sending processes the KILL signal

Cisco Nexus Operating System (NX-OS) Software

TAC support: http://www.cisco.com/tac

Copyright (c) 2002-2012, Cisco Systems, Inc. All rights reserved.

The copyrights to certain works contained in this software are

owned by other third parties and used and distributed under

license. Certain components of this software are licensed under

the GNU General Public License (GPL) version 2.0 or the GNU

Lesser General Public License (LGPL) Version 2.1. A copy of each

such license is available at

http://www.opensource.org/licenses/gpl-2.0.php and

http://www.opensource.org/licenses/lgpl-2.1.php

switch(boot)#

As you to see, Nexus5010 does not load system image, falls back to kickstart.

Plz help me.

2 Replies 2

aotholland
Level 1
Level 1

Can anyone help me?

Check the MD5 hash of the boot file.  It could be corrupted.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: