01-28-2015 01:28 PM
Hi i am not able to find how to check PO load balancing for storage VDC, although i know by default for FCoE traffic on storage vdc it is OXID but whether it is src-dst l4port or src-dst ipl4port.
02-12-2015 08:07 AM
Hi,
From "Nexus 5500 to Nexus 7000 Multi-Hop FCoE Configuration Example" ,
Note: On Nexus 7000, by default the source-destination-oxid load balancing mechanism is used for FCoE traffic.
So let's see what is the default load balancing mechanism in Nexus 7000,
From "Nexus 7000 interface configuration guide" ,
The default load-balancing mode for Layer 3 interfaces is the source and destination IP address, and the default load-balancing mode for non-IP interfaces is the source and destination MAC address.
Which means src-dst ip.
So what I think is you need to have src-dst ip in default VDC for OXID load balancing in Nexus 7000.
03-14-2018 11:18 PM
Hi Ashish,
Port channel Load balancing in Storage VDC
You can refer the guide below. https://www.cisco.com/c/en/us/td/docs/switches/datacenter/sw/nx-os/interfaces/configuration/guide/b-Cisco-Nexus-7000-Series-NX-OS-Interfaces-Configuration-Guide-Book/configuring-port-channels.html
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: