10-26-2020 08:33 AM - edited 10-26-2020 08:35 AM
Hello All,
I want to automate HX replication and VM restoration process. I have installed the respective package in powershell by running the following command :
It installs the package successfully but does not show me HXRunbook cmdlets.
It does not give any output when i run the following command :
get-module -name Cisco.Runbook
My power shell version is 5.1 , Can anyone point out if i am missing anything ?
Thanks in advance !!
Solved! Go to Solution.
10-27-2020 10:22 AM
It lists that as a function vs a cmdlet:
PS C:\Windows\system32> new-HXRunbook -recoveryMode TestRecovery -ProtectedSiteClusterIP
Sometimes using the Windows ISE and import-Module Cisco.HXPowerCLI , the GUI gives a fairly nice list of parameters.
Kirk...
10-27-2020 05:41 AM
Greetings.
Assuming you have run: Import-Module Cisco.HXPowerCLI
You can run: Get-Command -Module Cisco.HXPowerCLI
with output like:
CommandType Name Version Source
----------- ---- ------- ------
Function Get-HXJsonConfig 4.0.2.2 Cisco.HXPowerCLI
Function New-HXRunbook 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Add-HXProtectedVMToGroup 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Connect-HXCluster 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Disconnect-HXCluster 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Get-HXCluster 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Get-HXJobStatus 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Get-HXProtectedVM 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Get-HXProtectionGroup 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Get-HXTaskStatus 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Invoke-HXFailover 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Invoke-HXMigrate 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Invoke-HXPrepareFailover 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Invoke-HXPrepareGroupMigrate 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Invoke-HXPrepareGroupRecovery 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Invoke-HXPrepareReverseProtect 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Invoke-HXReverseProtect 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Invoke-HXTestFailover 4.0.2.2 Cisco.HXPowerCLI
Cmdlet New-HXProtectionGroup 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Protect-HXVM 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Remove-HXProtectedVMFromGroup 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Remove-HXProtectionGroup 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Unprotect-HXVM 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Wait-HXJob 4.0.2.2 Cisco.HXPowerCLI
Cmdlet Wait-HXTask 4.0.2.2 Cisco.HXPowerCLI
10-27-2020 06:48 AM
Thank you for your reply.
Yes i get the same output as yours but i want to leverage New-HXRunbook cmdlet which is mentioned in cisco document :
I don't see this cmdlet in the package , can you please confirm if you see that or I am missing something.
Thanks in advance
10-27-2020 10:22 AM
It lists that as a function vs a cmdlet:
PS C:\Windows\system32> new-HXRunbook -recoveryMode TestRecovery -ProtectedSiteClusterIP
Sometimes using the Windows ISE and import-Module Cisco.HXPowerCLI , the GUI gives a fairly nice list of parameters.
Kirk...
10-27-2020 11:44 AM
yes I see that in ISE.
Thank you for the help
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: