cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
625
Views
0
Helpful
2
Replies
Highlighted
Beginner

Replace Cisco MDS 9148 with new 9148S

Hi all,


I need to replace a Cisco MDS 9148 with a new Cisco MDS 9148S. I found the following documentation;

MDS 9000 Chassis Backup, Restoration, and Replacement Configuration Example, which is very good. But I still have a few questions. The Cisco MDS 9148 is running 5.2(8),  and that version is not supported on Cisco MDS 9148S. If I copy the running-config from the Cisco MDS 9148 to the new Cisco MDS 9148S that is running a different version (NX-OS 6.x or 8.x) will it cause any issues? Or should I upgrade the Cisco MDS 9148 to the same version as MDS 9148S First? Are there any other points I should be aware of? Any other documentation to look at?

 

Thank you in advance,

 

Best Regards,

 

 

 

Everyone's tags (1)
2 REPLIES 2
Highlighted
Beginner

Re: Replace Cisco MDS 9148 with new 9148S

ncardoso,

 

I'm facing the same issue right now (5/5/2020).

Please respond to this post when you get a chance.

 

Thank you.

 

Highlighted
Beginner

Re: Replace Cisco MDS 9148 with new 9148S

Hi vkbathala,

 

Just follow the instructions on MDS 9000 Chassis Backup, Restoration, and Replacement Configuration Example, you should be ok.

Thank you