What MIBs do I need?

[sergey_kharnam]

I'm implementing some testing solution.

I need to comunicate via SNMP with CISCO MDS 9148 FC switch

I need to:

• Read interfaces status
• Set interface down
• Set interface up

The question is what MIBs do I need to be able to do mentioned over? I'm using Python + NetSnmp module.

Thanks in advance.

[Brian Morrissey]

Hi Sergei,

IF-MIB probably contains what you are looking for to manage interfaces but you will need to load some other mibs as well.

http://tools.cisco.com/Support/SNMP/do/BrowseOID.do?objectInput=1.3.6.1.2.1.2.2.1.7&translate=Translate&submitValue=SUBMIT

MIB Loading Order

http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/sw/5_2/technical/reference/mibs_qkref/MIBRef.html#wp84290