ARP Table Overflow

[waleed.magdy]

Hello All

I have SG300 Switch and i use it as L3 (Core switch) ,There are 12 switch is connected to it.

I have 3 Vlans

My problem is i got a message (%ARPARPTBL: ARP Table Overflow, aggregated (9)

My TCAM

IPV4 Routing      in use 128

IPV4 Routing      Maximum 128

What will happened if i edit the maximum entries 

Does the problem will be solved or not ??

Can anyone here help me

And if i purchased 3750 or 3850 this problem will be solved or not ??

Thanks

[Iliya Gatsev]

Hi, 
My name is Iliya Gatsev from Cisco Technical Support Team.

Please let me know what is the current firmware and boot code version ?

Iliya Gatsev
Cisco STAC Network Engineer
Together we are the human network .:|:.:|:. CISCO

[waleed.magdy]

Thank you for your reply

Firmware Version (Active Image): 

1.3.5.58

Boot Version:

1.3.5.06

[Iliya Gatsev]

Hi, 
My name is Iliya Gatsev from Cisco Technical Support Team.

Please let me know what is the current boot code and firmware version ?

Iliya Gatsev
Cisco STAC Network Engineer
Together we are the human network .:|:.:|:. CISCO

[riteshsh]

Hi,

As per your query, the ARP table overflow error can be removed by increasing the TCAM Value.

Please increase the TCAM Value of the device and check if your issue is resolved or not.

Please rate this reply as useful if it resolves your issue.

[waleed.magdy]

Thank you riteshsh for your reply

Could you please determine the maximum number for the routed IP addresses as i have in my network about 350 host and i have WiFi guest users so does this switch can handle all of this??
Also all of these IPs will be joined to 4-5 VLANS