Switches - Small Business

Dear All, I'm after some advice and wanted to see if someone could confirm whether the folloiwng scenario is ok. I have a requirement for some new switching and would like to connect two host servers via 10GB SFP+ DA. The servers each have Intel x5...

I'm using an SG300 as an access switch to connect client machines to my network. I do have a bunch of wireless access points that need to be connected as well. It is my understanding that smart ports can be used to ensure that the configuration is co...

Our SG200-50 has 3 VLANs. I setup a mirrored port for a port on the 2nd VLAN. It appeared that all of the packets on that VLAN were being sent to that port. There were definitely lots of packets that were neither to nor from the machine on the port b...

Hi Team, I need to validate if Small Business Switches portfolio is compatible with Cisco Energywise Cloud or on Premises. A customer is interested to buy SMB Switches but he needs the EnergyWise functionality in these switches: SG300, SG500, SG500...

I have recently bought an SRW2024 Switch with webview. I am trying scince a couple of days to connect via console via this cable : http://www.amazon.de/gp/product/B00441NPY4 If i turn the switch off, i can see the switch POSTing and all this. After...

what is the diffrence between SRW2008P-K9 and SG300-10PP-K9 while the two switches give 62W ? 

Hello there, I have a problem with my switch as everytime I remotely reboot it I get it stuck and the sys light becomes orange. The only way I found to resolve this is by unplug it and plug it back again. Ios version is 15.0(2)EX5 Could use your advi...

Hi, I have purchased a CISCO SG-300 and downloaded the latest firmware for it which seems to be Sx300_FW_Boot_1.4.1.03.zip I unzipped the file and navigated to Upgrade/Backup Firmware and browsed to the location of the file and selected the file and ...

I was trying to upgrade the FW of SFE2000P from 1.0.0.48 to 1.0.1.1 via web based management but went in problem. Now all the ports are in green and there 's no activity, can't ping it via default ip. Connected with console cable, and this is the out...

Hi everybody, I have a newbie question (I might bein over my head, please be gentle) My ISP has built a MPLS network for me and all has been simple so far connecting everything together. They have supplied me with C1921 routers and configured the def...

Hi Everyone, I have two Vlan on SG300 Switch, One Vlan is for Server (VLAN 20) IP-(192.168.20.0)  and other is for clients (VLAN 50) IP-(192.168.50.0) When i'm trying to join a client to domain an error message is coming but when i change the ip addr...