Switches - Small Business

Good day!I have a Cisco SG200-8 Smart Switch and I need to get into it to mirror some ports.The default address is supposed to be 192.168.1.254 and I have the computer(s) (I've tried several) configured for the proper network address and mask.No ping...

 Cisco documentation states that dynamic vlan assignment via RADIUS should provide the following IETF values: The RADIUS user attributes used for the VLAN ID assignment are:IETF 64 (Tunnel Type)—Set this to VLAN.IETF 65 (Tunnel Medium Type)—Set this ...

Helloi have purchased quite a number of SF-300-24 SF-300-48 and SF-300-48P switches.i would like to ask the community if anyone knows if these devices support VMPS or if anyone has them operating in a centralized mac-based 802.1x config ?i would like...

I am able to log in via web gui but not all text is visible .did reset several times .any ideas ?

I'm moving from a WS-C2960-24PC-L to a SG300-24P.  Most things are working ok.  I'm seeing one thing that isn't coming over as expected, but it might be a syntax problem.  I have two ports that are setup on two VLANs.  Here is the port config from th...

Hi! I found a bug on SX300 series FW 1.4.0.88 on mac ace wildcard. The problem is, that the mac address mask is not working. Sample: mac access-list extended test permit any 00:13:21:b4:ea:2e 00:00:00:00:00:11 ace-priority 1 exit interface fastethern...

I have been having issues for a long time with the SG500X units. I keep getting many "Drop Events", or dropped packets (as seen in the attachment). There are no real "errors" or issues that I can see otherwise. I have 2 stacked SG500X-48 port switche...

I have configured a new SG220-26 switch. IPv4 IGMP snooping works nice. However when I enable MLD Snooping, I lose the IPv6 connectivity between the hosts connected to this switch. As soon as MLD Snooping is disabled (Multicast/Properties), IPv6 conn...

I am trying to configure multicast on a pair of SG300 switches. My source devices are a TV transcoder which puts out 23 channels, each on a seperate multicast address (224.1.1.x), and an IP CCTV camera outputting on 224.1.1.100. These connect using a...

I have a problems in this Switch (SF300-24). We have received this switch 11 Pic from customer. All are same problems. The problems is that, all LAN port are absolutely disabled. Without Consol port. When I connect this switch via Consol port, it sho...

Hi, I have a two new cisco switchesfirst switch: SG300-28PSecond switch: SF300-48P N.b: My Gateway is the firewall ip 10.0.0.1/16i am trying to configure two vlans with the same gateway 1st vlan for VOIP (Polycom) : ip range 10.0.10.0/242nd vlan for ...

Hello,I'm trying to setup following scenario which is working with no issue on netgear switches (like GS108) but I have not been able to get it to work on Cisco SG-200I did quite a bit of reading here on many post but nothing seems to work. Setup:P1 ...