Switches - Small Business

I'm using tftpd64 to try to update the bootcode, I keep getting an  error from the switch that the tftp server is unreachable and no  explanation why this is happening...I'm using my computer's wired IP and the full  filename, sx300_boot-13506.rfb, a...

We have 4x sg500X-48 switch now and we are still not sure to use the stacking option or not.Today we run MRTG to read with SNMP the switch stack but I can't find the stacking ports. Also in the webinterface I can't find the stacking ports to see util...

  Hi,I have 2 SG300-10mp switches which i am trying to create a link redundancy for over the two fibre ports.On the web interface when i go into the LAG settings ports g9 and g10 which are the fibre ones don't show up.How do i create the link aggrega...

hi,What is the best way to connect switch together (with 2960 switch)..cross or stright cable...up/down or normal port ?WAN ----Router 1 --- -SW1 ---- SW2                                  |                                  |                          ...

Have a SLM2024 Switch that I need to connect to 2 HP Switches. The HP Switches have a trunk between themselves and can communicate fine.  They are not stacked switches.I want to setup a network connection to each HP Switch, but do not want to create ...

Hello,I want to setup VLAN to separate attached devices (will use a VLAN capabel WLAN accesspoint).I am looking at the Cisco Small business products.Like this: SG200-08PThis is my goal:3 VLAN's: Internal, External, GuestDevices connected to Internal ...

Hello, does SG500 support LAG with ports on multiple switches? I would like to stack a pair of SG500 and connect each client to both using LACP in order to achieve switch redundancy.

Hi there,There seems to be a problem with some switches that it doesn't allow us to change the untagged VLAN in the smartport macro.This causes a problem: if we change it manually when we apply the smartport it works fine but if the switch reboots th...

Hi all,I have recently received a SG200-26P poe switch to potentially upgrade the office switch.So on first boot - it went through its post, got a solid green light.I then connected my PC to the first port to try and configure it via the web interfac...

Probably more pressing information than what is below, but if I have a SG300 in layer 3 mode, can it handle multiple DHCP scopes using one nic out of the server, or do I need to add a router.            I have two SG300's that I'm working with and I ...

I am trying to get multicast across VLANs working on my SG500 and since it doesn't have PIM, I think the Multicast-TV option can work.However, now my clients are getting switched to the Multicast-TV VLAN instead of the regular VLAN they are assigned....

I recently bought a Cisco SF200. I'm unfamiliar with the whole vlan topic. We have 2 departments. I want to create 2 vlans, that share one internet connection. We have a standard Cisco Cable Modem.Can someone please advise on how to get this up and r...