Switches - Small Business

Using two 48 port switches with about 40-50 users simultaneously accessing a handful of different flat-file database applications via windows shares, would it make more sense to run these switches both as standalone with a LAG group, or the default s...

Good day,We are experiencing bridge storms and network slow downs and we believe we have traced the issue down to users plugging a cat 5/6 cable between 2 ports on the wall both wired back to a SGE2010 switch.So we did a test - we plugged a single sh...

Hello,I just purchased a Cisco SF 102-24 unmanaged 100 series swith with a MGBSX1 mini-Gbic converter.  My goal is to connect this to a building that is connected with a Black Box LH1706A-ST media converter that has 100mb ST fiber connections.  In my...

I've been having a problem with a brand new SG300-10 switch that I posted about yesterday. I checked the firmware and it was at 1.0.0.27 and the lastest is 1.1.0.73. So I backed up the current firmware and loaded the 1.1.0.73 version and it seem to b...

I'm setting up two vlans and I would like all of vlan 2 to only have access to the WAN router on vlan1 at 192.168.30.1.VLAN1 192.168.30.xVLAN2 192.168.31.xI've setup the VLANS and static routes and I'm able to access the WAN router at 192.168.30.1 fr...

Hi there,We have recently purchased a Cisco SG300 and have been configuring it.We have four VLANs on the switch, as follows:Holly (VLAN 2 - 10.10.100.0/24)Holly WAN (VLAN 202 - 10.10.200.0/24)Tempo (VLAN 8 - 192.168.100.0/24)Tempo WAN (VLAN 208 - 192...

Hi,Got a SR2024CT-NA SG 102-24 smb switch with fibre sfp running to an old 3com switch.  It is supposed to actually replace a 3com on the source side.  There is connectivity but they say its very poor and clients from the 3 com end on the other end c...

I am wondering if anyone knows if the power save feature of the SG 102-24 can be disabled somehow ? Our college just purchased 24 of these switches. We are having a problem with the switches affecting some of our monitoring software (Vision from Nett...

HiI have configured 2 Vlans on the network. 1 - native Untagged for data traffic and 100 Tagged for VoIP.I have 4 SGE2010p switches 2- of them in stack working in L3 mode and 2 connected to the stack via single ethernet links in L2 mode.I have IP pho...

Ok i am having a problem with ACE rules.I have 5 VLANs, I assign VLANs to its ports and make them all Untagged.I created ACLs and a ACE rules for each ACL, and then assigned to the ports. So what i am trying to do is to deny access to from one port t...

Hi I Prodip Roy from India.Want to know is there any issue if we choose priority 0 for STP

Hi, I have an ESW-500, a SPA525G (also tried 504G), Polycom IP330/670 phones, and a Switchvox (Asterisk-based IP-PBX) and CDP causes some issues.Both the SPA5xx and Polycom phones support CDP but it appears to operate differently between the phones. ...

My question is: what is the difference between these two models switch family 300    SRW208MP-K9-NA y  SRW208P-K9-NA ?