Switches - Small Business

I recently purchased a SF 100D  5 port switch, that is frustrating me.  I currently have a New dell PC connected through a wall jack to an existing router, and wanted to add an ethernet printer.  When I connect everything to the switch, I can only ge...

We just purchased 8 managed switches POE to swap out our existing in preparation for our new phone system.  We installed them all after configuring with static IP.  Deployed... and all but two work fine.  Can someone assist with tips for troubleshoot...

Hi AllI have a SF 200-24P Cisco switch that seems to be rebooting constantly, When i connect it to mains power it seems to go through a startup cycle,  in this order - i have tried this with no network devices attached and the same thing happens1. Fa...

We recently purchased a SF 300-48P to replace a Layer 3 3Com switch that died. I've sucessfully put the switch into Layer 3 mode and assigned ip addresses to each of the VLANs but I cannot figure out how to implement routes for those. Here's some inf...

Hi,Mgmt Vlan 1 (default)Data VLan 10 (with access to internet)Is there a way to have a PC attached to a SG300 switch such that it can both access Vlan 10 for data and Vlan 1 for managment ?The PC's port clearly needs to be untagged PVID on vlan 10. I...

Hi,I have a recently purchased 28 port SG300 switch. Everything is working well. Unfortunately there is so much traffic flying around that a 10MB half duplex device is struggling to function as it is overloaded. Removing some of the sources of traffi...

I'm sure this is something very basic, but it has me a bit stumpedThis is the config on my SGE2010 switch in Layer 3 mode :-interface port-channel 1description "PCI VLAN1"exitvlan databasevlan 2exitinterface range ethernet 1/g(13-18,37-42)switchport ...

Hello,I am interesting what Combo ports mean in ESW 540 which has 4 SFP? Can I use 4 optic SFP at the same time(or 1000BaseT SFP) ??

Hi,i just got one of the SG 300-52 Switches, and i wondering if there is any tool from cisco for montioring/configuring/etc that supports this type of switch.I tried with Cisco Network Manager but seems like the software is not discovering the switch...

Hi,I keep losing the web interface on our router.I telnet to ports 80/443 and get no response.Restarting the router will bring up the interface, but then the next day I can't gain access.Is there a lock out feature etc? Any other way I can access the...

Hi,After upgarding my switch with the french package language (firmware V1.0.1.0), impossible to save a configuration modification. Error message. To save go back to the native language.Someone can confirm ?Patrick

hi everybody,I have to set up voip and data vlans on cisco sf 300-24P. I will set up phones over LLDP and on the same port (on switch) I will have untagged vlan 10 for data, so PC will be connected through IP phones on network. So what confuses me th...

Dear Cisco!now we have 2 switches: SF300-24on one SF300-24 we config it at layer 3 mode with VLAN configuration same as followingVLAN ID 2 (ports: 2 -6) have ip interface  192.168.2.254/24VLAN ID 3 (ports: 7 - 10) have ip interface  192.168.3.254/24V...

I have a sg300-52  in layer 3 mode.  I have 2 Dell access switches that connect to the sg300 in 4 port LAGs each.  Connectivity works as expected.Servers are on their own VLAN, and plugged directly into the sg300.  When somebody starts a file copy fr...