Switches - Small Business - Page 419

Looking for support docs and videos? Check here

We recently announced the release of our self-serve virtual assistant. You can read the full announcement here. Videos and documents are available within a click for our latest products. Once you've told the bot what device you're using, the context ...

Helpful support links - emulator, video tutorials, support pages +

Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Virtual Assistant - Discover support content and options for your gearSupport page index - Contains ...

SRW208G-AU replacement

Hi Team,I'm looking for a replacement for SRW208G-AU. I'm seeing some conflicting results from our tools1) from EMCO, its not EoS but its not orderable2) from EoL solution center, an external EoL announcement was made on 12 Feb 2010 which is why it m...

SLM224G4S-AU replacement

Hi Team,I'm looking for a replacement for SLM224G4S-AU and the only replacement is in the EOS notice below. But I can't find SLM224G in AU WPLhttp://www.cisco.com/en/US/prod/collateral/switches/ps5718/ps9994/end_of_life_notice_c51-583874.htmlCan this...

SRW224G4P: no web interface access

Hi to all!I've read many ppl having similar problem, but mine is a little bit different.The web interface of my switch (SRW224G4P) used to work very well, but since some time it is not possible to access, it sends back a page that contains:<html><bod...

vLan config on SLM2008

HiI have a network setup with a SA-520 firewall appliance, and a SLM2008 switch. I'm trying to confgure this with multiple vlans. On the SA-520 I've configured port 4 as a trunk with vlan's 1,2 and 4.But I'm unable to get this to work with the SLM200...

Sge2000 and srw2024 help.

Hi We are a BMS company working on a big project, We have decided to install a large network which involve 6x SGE2000 models in standalone mode with one set as a layer 3, also about 25 SRW2024 connected to each other and to the SGE2000 all with fibre...

SFE / SGE switch questions for planning

I've looked at all of the SFE / SGE documentation, and no where on them are the power requirements listed (aside from the fact that they can run on 110/220v) I'm looking for maximum watts/amps per unit (for all types, SFE2000, SFE2000P, SFE2010, SF...

SRW2024 switch and Windows 7 workstations

I have a Linksys SRW2024 switch in place at a site. The client has introduced several Windows 7 desktops into the network. They are having intermittent loss of internet (and to a lesser extent, LAN) connectivity. It appears to be totall random, the...

C500 Switch Limitations

Pro's Request your help in understanding the limitations of C500 Switch. Recently I had a unsuccessful support incident in a simple VLAN and TRUNKING environment. I wan unable to get the simple trunk work to carry a access VLAN. Can any one deciph...

Configuration problem with SGE2010-G5

Hello,i've recently bought a SGE2010-G5 48 Ports Workgroup switch. The first thing I did was to give the device a static IP Address, 131.237.95.253, with the default gateway 131.237.95.254. Than I used a webbrowser to configure the switch, which incl...

Resolved! SFE2000 reboots continuousley with broken image

I am just looking for a clue to switch back the active image to the good one, but I don't have a chance cause it is an intermediate image from a software upgrade and there is no possibility in the CLI because of the continuous reboots.Thanks for help...

MAC AUTH BYPASS on a ESW 520

Hi, I've got som issues concering an ESW 520 Switch - we need to use Mac Auth Bypass (only) but it seems that it won't work!Only works when you apply 802.1x!!Please assist!ThanksLin Lundh

Resolved! Small Business- ESW-520-48P-K9

I need to decide on few things regarding this switch before recommending this switch to my customer. I have the following questions that i need some expert advice.Questions1.) Does this switch support POE 15.4W on all 48 10/100 ports (ESW-520-48P-K9)...

Resolved! ESW-520-8P-K9 POE Capabilities

Can the ESW-520-8P-K9 supply enough POE to support 7 PVC2300 cameras? If not, what are it's limitations?

Problem log in a SRW224G4 using serial port

Hello,I´m having problems log in a SRW224G4 switch through serial port. I enter user "admin" and enter in password but occurs nothing. I can login without problem using the web tool and the same user and password. The serial cable came with the switc...

Trying to enable/disable PoE for SRW224G4P

I can not enable or disable a port for PoE. When I try to save changes I get a popup error that says "Data is Invalid" and it will not save the changes. All of the ports are setup the exact same. I have Ports 1-19 enabled and working, I need to enabl...

Switches - Small Business

Forum Posts

Looking for support docs and videos? Check here

Helpful support links - emulator, video tutorials, support pages +

SRW208G-AU replacement

SLM224G4S-AU replacement

SRW224G4P: no web interface access

vLan config on SLM2008

Sge2000 and srw2024 help.

SFE / SGE switch questions for planning

SRW2024 switch and Windows 7 workstations

C500 Switch Limitations

Configuration problem with SGE2010-G5

Resolved! SFE2000 reboots continuousley with broken image

MAC AUTH BYPASS on a ESW 520

Resolved! Small Business- ESW-520-48P-K9

Resolved! ESW-520-8P-K9 POE Capabilities

Problem log in a SRW224G4 using serial port

Trying to enable/disable PoE for SRW224G4P

Congratulations to all the winners of the April 2023 Spotlight Award!

Renew.cisco.com just got refreshed, and it will make your life easier!

Announcing Resources That Guide You to Success

Cisco Business Product Family

Cisco Switching Product Family

Does CBS350 10Gbit Base-T ports support 2.5Gbit and 5Gbit?

Cisco Switch CBS350-24T-4G inaccesible after shutting down

CBS350 series firmware files

SF300-24 24-Port 10/100 Managed Switch

connect a C2960x to a port on a SG500Stack