Switches - Small Business

Hi, Just checking if anyone came across this after upgrading firmware from 1.4.9.4 to 1.4.11.2... The GUI stop loading at Processing Data 80% when the GUI url is a DNS name, but it completes if the URL is it's IP address. Working url ...https://192.1...

Hi,I have two SX550X-24Fs in a Stack running 2.5.0.90 code and I'm wondering if its possible to change the Default VLAN to something other than VLAN 1. We run some SG300s and you can enter the following command and reboot to change the Default VLAN.v...

On firmware 2.5.0.78 as well as on 2.4.5.71 in the GUI after saving the running configuration in the startup configuraton and then restarting the switch, the "save icon with red X" continues to flash, although the configuration has not changed. Teste...

Hello.I'm configuring remote access to CLI for switch SG300-28. I have configured some features in Web interface. Currently is possible to connect to switch from PC trough telnet and SSH, from router (where this switch is connected) by telnet but NOT...

Good day everyone.   We currently have two sites conected thru wlan link and using OSPF between them , simple setup 1 subnet per site.  we need to implement vlans on each site to have multiples network segments.  I did the following diagram of the ac...

Hi @All, how do I disable Cisco FindIT on my SG350XG?I dont want to use it at the moment but the connection tries are filling the logs of my other switches. Deleting all device groups did not work as "Default" cant be deleted. Best regards,Hendrik

We have a MDF closet that has a SG500X-24P switch that has 4 SFP-10G-SR modules in XG1-XG4.  Then we have 4 IDF closets that each have a SG500X-24P switch in them with 1 SFP-10G-SR module. There is a fiber line going from each of the IDF closets back...

Greetings,I have a CISCO SG 300-28 switch, and I was upgrading it's quite old firmware today, first using older major versions of firmwares and boot images and then stpe-by-step using newer major versions.When I've reached the latest firmware version...

My switch always consumes 100% CPU.I see some-one else had a problem alike, I provided my own debug data in the attachment. I can't find the source. There are 2 switches in stack, the amount of traffic isn't high and the CPU is always consuming 100%,...

SO I have patched all of my switches and I do a vulnerability scan after each and every patch to see how it looks. I have many SG500s and a few SG300s. Most of the switches came up clean after that last patch. I have 2 SG500s and 2 SG300s that come u...

Hi, we appear to be having some latent ping responses from some of our SG300 switches.  My understanding is that these switches will treat and handle ICMP on a "Best Efforts" basis and that on a busy network, or indeed a busy networking period, we ca...

I have a Cisco SG350 that I need to create 2 VLANs. VLAN1 (192.68.10.0/24) is for a Crestron Control Subnet that has a Crestron processor, Matrix and other devices on it along with an outboard router and DHCP server connected. VLAN2 (192.68.12.0/24) ...

Hello, I have switch01 configured and running with 5 VLANs. I want to add switch02 and stack them. I configured switch01 as Unit ID 1 after reset. To have some type of fault tolerance should I setup switch02 to have an "auto" Unit ID in case switch01...