We recently announced the release of our self-serve virtual assistant. You can read the full announcement here. Videos and documents are available within a click for our latest products. Once you've told the bot what device you're using, the context ...
Forum Posts
(Updated September 2023 - Added Catalyst 1200 and Catalyst 1300 ) Hello! This sticky-post will serve as a sign-post for incoming community members. Below you will find links to pages that you may find helpful. Catalyst 1200 & 1300 Hardware Install...
Does anyone know, what is the standard CPU usage for the SG350X, when network core is used, it is stacked and with RSTP active?Currently he is always averaging 56%. Thanks!
I have two SGE2000 switches - one PoE, one not - in a stack configured for Layer 3 mode. On the stack, I have a VLAN (5) configured and tagged for all ports on both switches. I want to assign an IP address to the VLAN interface that I can use for rou...
Hello,I updated the SG500x to the newest firmware, now it does not start any more. I conected over the serial port, tryed loading old firmwares over hiper terminal, but same issue. the switch is repeating thiss over and over:Boot1 Checksum Test.........
Resolved! Unknown connection in TCP Service Table
morning, likely a newbie question, I have realized there's a connection I do not identify in my SG350-28P from its local port 53297 to a remote IP in AWS (18.205.166.131) port 443. Is this maybe some service within the Switch that I never realized ea...
Hello, i have a big problem with the SG-300 -10MPP switch after my trainee tried to update the device.Nothing works anymore, no reset , no network connections, the System light is blinking and via Putty i only get this message.What happend and what c...
I bought a SG110-16 and I am trying to connect my uVerse router via Ethernet cable to the switch, it does not light up any indicators. If I put the same ethernet cable into my old netgear switch it works as expected, lighting up the port. Is there...
Resolved! SSH key size on SG300/SG500 Switches?
Anyone know the key size the SG300/SH500 switches use for SSH?
hello, SG250x 48intervlan routing impossible...I have 3 vlan1 - with Static adress on vlan interface 192.168.1.254(gateway vlan1 computers)3 - with Static adress on vlan interface 192.168.3.254 (gateway vlan3 computers)100 - with Static adress on POR...
Hi all, I hope you can help me. I have 2 switches SG350, and I want to propagate the VLANS I create in one of them to the other, I know that in this model there is no VTP domain to do that. I found out that there is a similar command that does that,...
Hi,Expecting your valuable support to find root cause of intermittent /random network disconnection happening for intervlan (intervlan routing handled by firewall) & intra vlan communication.Please find the attachment.01. Network architecture.02. All...
Let me know it is possible to switch the SG250-08 Small Business Switch to Layer 3 mode.I've found in switch management GUI in Advanced View position Interfaces that for all port it is possible but my question concers how to switch all device to L3 m...
Hi All, I would like to communicate 2 different IP block on the switch. Model Name : SG250-26 GE5 : Vlan50 --> 192.168.5.1GE6 : Vlan60 --> 192.168.6.1 Pc s connected to GE5 : 192.168.5.2Pc s connected to GE6 : 192.168.6.2 Steps i did ; Created Vlan...
Hi All I have a SG300 with the latest firmware. I have two modems attached to it via ethernet. DHCP is turned off on each modem so I'm using the SG300 to assign IP's via DHCP Server. Let me explain. Modem 1 : LTE Modem with static IP 10.0.0.2Modem 2 ...
Has anyone seen this issue of high CPU load on a stacked SG350x-24 data switch when using port channel that span across the stack to edge stacked switches. We use the 24 port switches at the core and 2 or 4 (try to keep to 4) port port channels to Ed...
Our office recently updated our switch from a 28 port SG300 to a 48 port SG-350-52MP. We immediately started having intermittent problems with DHCP after the swap.This issue affects all VLANs, wired and wireless. Some devices are completely unable to...
